Dior 26SS Oblique Full-Coverage Jacquard Knit Zip Hoodie – Grey – Unisex 624G28A2E37-X8330

Dior 26SS Oblique Full-Coverage Jacquard Knit Zip Hoodie – Grey

The Dior Oblique motif produced at the construction level, not applied to the surface. This 26 Spring/Summer zip hoodie is knitted in one continuous piece on a German STOLL whole-garment flat-knitting machine — the process that eliminates cut-and-sew panel assembly entirely and produces the Oblique jacquard pattern across the full garment body, sleeves, and hood in a single uninterrupted knitting cycle. The pattern is produced by 12-gauge high-precision color-yarn interlacing: the Oblique motif is not printed, not embroidered, and not woven into a separate fabric — it is the knit structure itself, produced by the color-yarn interlock at every stitch point across the full garment surface. Every hardware and finishing detail — custom metal zip, double-strand edge binding, 2×2 high-elastic ribbed cuffs and hem, double-layer hood interlining, same-color high-elastic drawcord — is specified and tested to the same standard as the knit body construction.

Why You'll Love It

• German STOLL Whole-Garment Flat-Knitting – One-Piece Construction: The entire hoodie — front body, back body, both sleeves, and hood — is knitted as a single continuous piece on a German STOLL whole-garment flat-knitting machine, with no panel cutting and no panel assembly seams. The STOLL whole-garment process is the production method used for the highest-construction-standard knit outerwear: it eliminates every cut-and-sew seam from the garment body, removing the seam allowance waste, the panel alignment variables, and the structural weak points that cut-and-sew construction introduces. The Oblique jacquard pattern runs continuously across every panel because there are no panel edges where the pattern would need to be re-registered at a seam.
• 12-Gauge High-Precision Color-Yarn Jacquard Interlacing – Full-Coverage Oblique: The Dior Oblique monogram motif produced across the full garment surface by 12-gauge color-yarn interlacing — a jacquard knitting process in which the color pattern is produced by the controlled interlock of two or more yarn colors at each needle position across the knitting width. At 12-gauge, each stitch is fine enough to produce the Oblique motif’s diagonal letterform geometry with sharp, unbroken lines and no stitch-level distortion or pixelation. The pattern reads with the clarity and definition of a woven jacquard rather than a knitted graphic — dimensional, structurally part of the fabric, and identical across every repeat across the full garment. No misprints, no dropped stitches, no pattern offset at any panel boundary.
• Combed Cotton Blend Yarn – Soft, Airy, Draped: The garment body knitted from selected high-quality combed cotton blend yarn — combed cotton in which short and irregular fibers have been removed before spinning, leaving a longer, more aligned fiber bundle that produces a smoother, more uniform yarn with a softer skin-contact feel, lower pilling tendency, and better dye uptake than standard carded cotton yarn. The blend composition adds the dimensional stability and drape recovery that pure cotton lacks: the hoodie retains its silhouette after wear and washing rather than relaxing out of shape. The surface finish reads as a fine matte — the premium dull finish that is the visual register of luxury knitwear.
• Double-Layer Hood – Composite Interlining, High-Density Reinforcement Strip: The hood constructed in a double-layer composite structure with a high-density interlining strip bonded at the hood opening edge — the interlining that prevents the hood from collapsing inward or losing its three-dimensional profile when worn. The double-layer composite construction gives the hood the self-supporting structure that a single-layer knit hood cannot maintain: the hood opening holds its shape when deployed, frames the face without collapsing at the sides, and returns to its stored silhouette when the drawcord is released. The hood profile that reads as architectural rather than casual.
• Custom Metal Zip – 1,000-Cycle Tested, Double-Strand Edge Binding: A custom metal zip at the center-front placket — tested to 1,000 open-and-close cycles for smooth operation and pull-tab durability before production approval. The zip runs without catch or resistance at any point across its full travel at the start of production and is specified to maintain that operation through the full 1,000-cycle test range. The zip edges are finished with a double-strand binding stitch — a two-thread edge treatment that prevents zip-tape unraveling at the stitch line and ensures the zip panel sits flat and bonded to the knit body at full zip-edge contact rather than lifting or gapping.
• 2×2 High-Elastic Ribbed Cuffs & Hem – Double-Needle Coverstitch, Anti-Unravel: The cuffs and hem finished in 2×2 high-elastic rib — the two-by-two knit rib structure that produces maximum elastic recovery while maintaining a flat, non-curling edge. The rib termination is secured with a double-needle coverstitch and an anti-unravel stitch cycle — the double-needle coverstitch that distributes the rib termination stress across two needle lines rather than one, and the anti-unravel cycle that locks the final stitch loop against unraveling under repeated wear and washing. The cuff and hem that fits cleanly against the wrist and hip, returns to its original width after stretching, and does not unravel at the edge under normal use conditions.
• Same-Color High-Elastic Drawcord – Finished End Treatment: The hood drawcord in a same-color high-elastic cotton cord — tonal to the grey Oblique body, high-elastic for return-to-length recovery after adjustment, and finished at both ends with a precision end-cap treatment that prevents fraying and maintains the cord tip structure through repeated use. The drawcord end treatment that reads as a finished detail at close range rather than a cut cord end.
• 14-Stitch-per-3cm Seam Density – Uniform Across All Joins: All construction joins held to a uniform stitch density of 14 stitches per 3 centimeters — the seam specification that produces flat, even stitch lines across every join on the garment: straight, fine, and consistent in tension from the first stitch to the last. At 14 stitches per 3cm, the seam is dense enough to prevent gape under stress and fine enough to lie flat without creating a raised ridge at the seam line. The seam density that is visible at close range as the mark of a controlled, consistent sewing operation rather than a variable-tension production line.
• Unisex Design: Proportioned for both men and women — the Dior 26SS Oblique full-coverage jacquard knit zip hoodie in the grey Oblique colorway that is the house’s most seasonless, most wearable, and most construction-forward expression of the Oblique motif.

Size Guide

Note: Shoulder measurements not specified for this style; fit is relaxed. All measurements are taken flat. A 1–3 cm variance is within normal range.

Care Instructions

• Hand wash or machine wash cold (max 30°C)
• Hang dry — do not tumble dry
• Low-temperature iron only — do not iron directly over zip or drawcord ends
• Do not bleach
• Separate colors when washing
• Dry clean permitted

SKU: 624G28A2E37-X8330  |  Available in sizes S–XL  |  Dior 26 Spring/Summer Collection