{"title":"Balenciaga","description":null,"products":[{"product_id":"acne-studios-ink-splash-vintage-washed-straight-leg-denim-jeans-unisex-hh5800716-副本","title":"Balenciaga Light-Blue Washed Denim Overshirt – Unisex  R5200819","description":"\u003ch2\u003eBalenciaga Light-Blue Washed Denim Overshirt\u003c\/h2\u003e\u003cp\u003eThe difference between good denim and great denim is in the details that most people never notice — until they’re missing. This Balenciaga light-blue washed overshirt is built to a construction standard where every measurement is verified, every seam runs straight, and every finish element is consistent from left to right and front to back. Relaxed, oversized, and effortlessly versatile. The overshirt that rewards the second look.\u003c\/p\u003e\u003ch3\u003eWhy You'll Love It\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUtility Patch Pockets – Precision Stitched:\u003c\/strong\u003e Dual utility patch pockets on the chest with flat, dense stitch lines that run perfectly straight — pocket shapes are square and dimensionally stable, with zero twist, zero sag, and zero collapse at any corner. Construction discipline made visible.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymmetrical Bleach-Fade Transition:\u003c\/strong\u003e The light-to-white fade across both chest panels runs in exactly the same direction and reaches the same tonal boundary on both sides — the contrast gradient is minimal and controlled, with no left-right color variance. Wash symmetry is a quality indicator that separates a finished garment from a factory piece.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatched Front Yoke Seam:\u003c\/strong\u003e The horizontal front panel division seam is cut and sewn to identical length on both left and right sides, with perfectly matched stitch pitch across the full width — a construction benchmark that is immediately visible to anyone who has held a well-made garment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Pocket Distress – Calibrated Depth:\u003c\/strong\u003e The rear pocket distress and vintage wear work is applied at a consistent depth on both sides — light and dark tones transition naturally and symmetrically, with no overworked or underworked panel. The aging reads as uniform and authentic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRivet Installation – Square and Secure:\u003c\/strong\u003e All pocket rivets are installed perfectly upright with consistent orientation and full mechanical engagement — no tilt, no partial seating, no loose hardware. The rivet is the smallest detail. It is also the most inspected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight-Blue Washed Finish:\u003c\/strong\u003e A clean, bright pale indigo wash with a smooth, even surface — the kind of light-blue that photographs well, pairs with everything, and improves with every wear and wash cycle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelaxed Oversized Silhouette:\u003c\/strong\u003e A generously proportioned, drop-shoulder overshirt cut with a point collar, dual chest patch pockets, button-front placket, and single-button cuffs — wears as a shirt, an overshirt, or a lightweight layer across every season.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnisex Design:\u003c\/strong\u003e Proportioned for both men and women — a wardrobe-anchoring piece with universal appeal.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSize Guide\u003c\/h3\u003e\u003cp\u003e\u003cem\u003eNote: All measurements are taken flat. A 1–3 cm variance is within normal range.\u003c\/em\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eChest (cm)\u003c\/th\u003e\n\u003cth\u003eLength (cm)\u003c\/th\u003e\n\u003cth\u003eHeight (cm)\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003ctd\u003e74\u003c\/td\u003e\n\u003ctd\u003e160–170\u003c\/td\u003e\n\u003ctd\u003e100–130\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e114\u003c\/td\u003e\n\u003ctd\u003e75\u003c\/td\u003e\n\u003ctd\u003e165–175\u003c\/td\u003e\n\u003ctd\u003e130–150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e118\u003c\/td\u003e\n\u003ctd\u003e77\u003c\/td\u003e\n\u003ctd\u003e170–180\u003c\/td\u003e\n\u003ctd\u003e150–170\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e122\u003c\/td\u003e\n\u003ctd\u003e78\u003c\/td\u003e\n\u003ctd\u003e175–185\u003c\/td\u003e\n\u003ctd\u003e170–190\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eCare Instructions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHand wash or machine wash cold (max 30°C)\u003c\/li\u003e\n\u003cli\u003eHang dry — do not tumble dry\u003c\/li\u003e\n\u003cli\u003eLow-temperature iron only\u003c\/li\u003e\n\u003cli\u003eDo not bleach\u003c\/li\u003e\n\u003cli\u003eSeparate colors when washing\u003c\/li\u003e\n\u003cli\u003eDry clean permitted\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eSKU: R5200819  |  Available in sizes 1–4\u003c\/em\u003e\u003c\/p\u003e","brand":"Balenciaga","offers":[{"title":"1","offer_id":46968491966498,"sku":null,"price":145.0,"currency_code":"USD","in_stock":true},{"title":"2","offer_id":46968491999266,"sku":null,"price":145.0,"currency_code":"USD","in_stock":true},{"title":"3","offer_id":46968492032034,"sku":null,"price":145.0,"currency_code":"USD","in_stock":true},{"title":"4","offer_id":46968492064802,"sku":null,"price":145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/7923\/0242\/files\/105.jpg?v=1788524663"},{"product_id":"levi-s-silver-tab-baggy-carpenter-denim-jeans-black-snow-wash-unisex-ys6400328-副本-1","title":"Balenciaga BLCG Crown Patch Raglan Track Jacket – Unisex  HH6400905","description":"\u003ch2\u003eBalenciaga BLCG Crown Patch Raglan Track Jacket\u003c\/h2\u003e\u003cp\u003eThe sportswear silhouette, taken seriously. Built on a \u003cstrong\u003e50% cotton \/ 50% nylon technical poplin shell\u003c\/strong\u003e with a polyester mesh lining and six distinct construction techniques applied to a single garment — 15,000-stitch Tajima multi-head machine embroidery, silicone heat-transfer print, reflective piping, raglan sleeve construction, and a crown-wheat-monogram badge finished as a standalone cut patch. The Balenciaga number 10 back graphic completes the football-club reference without apology. A track jacket that has been engineered rather than assembled.\u003c\/p\u003e\u003ch3\u003eWhy You'll Love It\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50\/50 Cotton-Nylon Technical Poplin Shell:\u003c\/strong\u003e A 50% cotton \/ 50% nylon technical poplin — the precise blend that delivers the lightweight, structured, wrinkle-resistant hand-feel of high-performance outerwear while retaining the breathability and skin-comfort of a natural fiber content. Abrasion-resistant, shape-retentive, and soft against the skin simultaneously.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolyester Mesh Technical Lining:\u003c\/strong\u003e A perforated open-mesh polyester lining throughout — the hollow mesh structure maximizes air circulation efficiency, accelerates moisture and heat dissipation during high-intensity movement, and keeps the interior surface dry and cool regardless of exertion level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15,000-Stitch Tajima Multi-Head Crown Badge Embroidery:\u003c\/strong\u003e The crown-wheat-monogram badge is embroidered on a separate base fabric using a Tajima multi-head computerized embroidery machine at approximately 15,000 stitches — high-gloss gold and silver thread applied in layered passes using fill-stitch and outline lock-stitch techniques to build a three-dimensional relief with tight, full stitch lines and clean cut edges. The finished embroidery is die-cut to its exact outline and vehicle-stitched onto the garment — combining sculptural three-dimensional presence with wash-fast durability and zero thread-pull or pilling risk.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilicone Heat-Transfer Print – Logo \u0026amp; Number Graphics:\u003c\/strong\u003e The ‘balenciaga’ chest wordmark and rear number 10 are applied via a silicone heat-transfer process — pre-printed on release film with a hot-melt adhesive base layer, then bonded to the shell surface under precision heat and pressure. The result is a flat, fine-surface matte finish with clean-cut edges, zero fraying, and strong adhesion that resists cracking, lifting, and delamination through repeated washing. Silicone material flexibility means the graphic moves with the fabric without stiffness or skin contact discomfort.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflective Piping – Shoulder \u0026amp; Side Seam:\u003c\/strong\u003e High-visibility reflective piping runs the complete shoulder line and full side seam on both sides via a sewn-in cord technique — straight, smooth, and evenly tensioned from shoulder to hem. The piping contains an internal reflective material layer that activates under direct light for high-visibility performance and doubles as a clean structural outline that defines the jacket’s three-dimensional silhouette. Flexible, non-stiffening, wash-stable, and resistant to cracking or delamination through repeated care cycles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRaglan Sleeve Construction:\u003c\/strong\u003e A classic raglan cut with diagonal sleeve-to-body seam integration — no hard shoulder seam division, continuous smooth diagonal lines from collar to cuff. Full shoulder mobility with zero tightness or pull during movement. The diagonal seam line visually softens and narrows the shoulder profile, balancing the relaxed fit of the body with a clean, athletic outline.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-Zip Stand Collar:\u003c\/strong\u003e A structured stand collar with a full-length zip-through placket — clean neck coverage, wind resistance, and the track-jacket silhouette in its most recognizable form.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnisex Design:\u003c\/strong\u003e Proportioned for both men and women — the Balenciaga BLCG track jacket in its most complete, season-spanning form.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSize Guide\u003c\/h3\u003e\u003cp\u003e\u003cem\u003eNote: All measurements are taken flat. A 1–3 cm variance is within normal range. Shoulder width not listed — raglan construction has no defined shoulder seam point.\u003c\/em\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eChest (cm)\u003c\/th\u003e\n\u003cth\u003eLength (cm)\u003c\/th\u003e\n\u003cth\u003eHeight (cm)\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eXS\u003c\/td\u003e\n\u003ctd\u003e143\u003c\/td\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003ctd\u003e160–170\u003c\/td\u003e\n\u003ctd\u003e110–140\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eS\u003c\/td\u003e\n\u003ctd\u003e147\u003c\/td\u003e\n\u003ctd\u003e72\u003c\/td\u003e\n\u003ctd\u003e165–175\u003c\/td\u003e\n\u003ctd\u003e140–160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM\u003c\/td\u003e\n\u003ctd\u003e150\u003c\/td\u003e\n\u003ctd\u003e74\u003c\/td\u003e\n\u003ctd\u003e170–180\u003c\/td\u003e\n\u003ctd\u003e160–180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL\u003c\/td\u003e\n\u003ctd\u003e154\u003c\/td\u003e\n\u003ctd\u003e76\u003c\/td\u003e\n\u003ctd\u003e175–185\u003c\/td\u003e\n\u003ctd\u003e180–210\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eCare Instructions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHand wash or machine wash cold (max 30°C)\u003c\/li\u003e\n\u003cli\u003eHang dry — do not tumble dry\u003c\/li\u003e\n\u003cli\u003eLow-temperature iron only\u003c\/li\u003e\n\u003cli\u003eDo not bleach\u003c\/li\u003e\n\u003cli\u003eSeparate colors when washing\u003c\/li\u003e\n\u003cli\u003eDry clean permitted\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eSKU: HH6400905  |  Available in sizes XS–L\u003c\/em\u003e\u003c\/p\u003e","brand":"Balenciaga","offers":[{"title":"XS","offer_id":47343876538402,"sku":null,"price":158.0,"currency_code":"USD","in_stock":true},{"title":"S","offer_id":47343876571170,"sku":null,"price":158.0,"currency_code":"USD","in_stock":true},{"title":"M","offer_id":47343876603938,"sku":null,"price":158.0,"currency_code":"USD","in_stock":true},{"title":"L","offer_id":47343876636706,"sku":null,"price":158.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/7923\/0242\/files\/4_106c5da9-f9b6-4cd0-b9b4-e856c751f0a7.jpg?v=1788858377"},{"product_id":"balenciaga-blcg-crown-patch-raglan-track-jacket-unisex-hh6400905-副本-1","title":"Balenciaga BLCG Crown Patch Wide-Leg Track Pants – Unisex  HH5600905","description":"\u003ch2\u003eBalenciaga BLCG Crown Patch Wide-Leg Track Pants\u003c\/h2\u003e\u003cp\u003eThe bottom half of the BLCG track set. Built on the same \u003cstrong\u003e50% cotton \/ 50% nylon technical poplin shell\u003c\/strong\u003e and the same 15,000-stitch Tajima multi-head crown badge embroidery as the BLCG track jacket — a side-stripe wide-leg trouser cut that carries the house credentials at the left thigh with the same production discipline applied above the waist. Worn as a set or as a standalone, the construction logic is identical. The details hold at every distance.\u003c\/p\u003e\u003ch3\u003eWhy You'll Love Them\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50\/50 Cotton-Nylon Technical Poplin Shell:\u003c\/strong\u003e A 50% cotton \/ 50% nylon technical poplin — the same shell as the BLCG track jacket. Lightweight, structured, wrinkle-resistant, and abrasion-durable while retaining the breathability and skin-comfort of the cotton fiber content. The blend that performs at high-intensity movement and reads as refined at rest.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolyester Mesh Technical Lining:\u003c\/strong\u003e A perforated open-mesh polyester lining throughout — the hollow mesh structure maximizes air circulation, accelerates moisture and heat dissipation during movement, and keeps the interior surface dry and cool regardless of exertion level. The lining engineered for the same performance standard as the jacket shell above it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15,000-Stitch Tajima Multi-Head Crown Badge Embroidery:\u003c\/strong\u003e The crown-wheat-monogram badge is embroidered on a separate base fabric using a Tajima multi-head computerized embroidery machine at approximately 15,000 stitches — high-gloss gold and silver thread applied in layered passes using fill-stitch and outline lock-stitch techniques to build a three-dimensional relief with tight, full stitch lines and clean cut edges. Die-cut to its exact outline and vehicle-stitched to the left thigh panel — sculptural three-dimensional presence with wash-fast durability and zero thread-pull or pilling risk.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide-Seam Contrast Stripe:\u003c\/strong\u003e A tonal contrast stripe running the full outer leg length on both sides — a clean, uninterrupted vertical line from waistband to hem that defines the trouser silhouette and echoes the reflective piping language of the track jacket without replicating it exactly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelaxed Wide-Leg Silhouette:\u003c\/strong\u003e A high-rise elasticated waistband with a wide, straight leg from hip to hem — maximum freedom of movement, clean drape, and the track-trouser proportion that pairs with the BLCG jacket as a complete co-ord or stands independently as a statement bottom.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Side Pockets:\u003c\/strong\u003e Clean side-seam pockets on both sides — functional, flush-finished, and unobtrusive against the wide-leg shell.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnisex Design:\u003c\/strong\u003e Proportioned for both men and women — the BLCG crown patch track pants in their most complete, season-spanning form. Designed to pair with the BLCG Crown Patch Raglan Track Jacket (sold separately).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSize Guide\u003c\/h3\u003e\u003cp\u003e\u003cem\u003eNote: All measurements are taken flat. A 1–3 cm variance is within normal range.\u003c\/em\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eWaist (cm)\u003c\/th\u003e\n\u003cth\u003eLength (cm)\u003c\/th\u003e\n\u003cth\u003eHeight (cm)\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eXS\u003c\/td\u003e\n\u003ctd\u003e66\u003c\/td\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003ctd\u003e160–170\u003c\/td\u003e\n\u003ctd\u003e110–140\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eS\u003c\/td\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003ctd\u003e111\u003c\/td\u003e\n\u003ctd\u003e165–175\u003c\/td\u003e\n\u003ctd\u003e140–160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM\u003c\/td\u003e\n\u003ctd\u003e74\u003c\/td\u003e\n\u003ctd\u003e112\u003c\/td\u003e\n\u003ctd\u003e170–180\u003c\/td\u003e\n\u003ctd\u003e160–180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL\u003c\/td\u003e\n\u003ctd\u003e78\u003c\/td\u003e\n\u003ctd\u003e113\u003c\/td\u003e\n\u003ctd\u003e175–185\u003c\/td\u003e\n\u003ctd\u003e180–210\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eCare Instructions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHand wash or machine wash cold (max 30°C)\u003c\/li\u003e\n\u003cli\u003eHang dry — do not tumble dry\u003c\/li\u003e\n\u003cli\u003eLow-temperature iron only\u003c\/li\u003e\n\u003cli\u003eDo not bleach\u003c\/li\u003e\n\u003cli\u003eSeparate colors when washing\u003c\/li\u003e\n\u003cli\u003eDry clean permitted\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eSKU: HH5600905  |  Available in sizes XS–L  |  Pairs with BLCG Crown Patch Raglan Track Jacket (SKU: HH6400905)\u003c\/em\u003e\u003c\/p\u003e","brand":"Balenciaga","offers":[{"title":"XS","offer_id":47435090755618,"sku":null,"price":118.0,"currency_code":"USD","in_stock":true},{"title":"S","offer_id":47435090788386,"sku":null,"price":118.0,"currency_code":"USD","in_stock":true},{"title":"M","offer_id":47435090821154,"sku":null,"price":118.0,"currency_code":"USD","in_stock":true},{"title":"L","offer_id":47435090853922,"sku":null,"price":118.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/7923\/0242\/files\/23_f8261016-9528-413c-a7d1-f94a748acfd9.jpg?v=1788945071"},{"product_id":"gucci-new-cartoon-series-short-sleeve-tee-early-spring-collection-ts2600331-副本-3","title":"Balenciaga BLCG Classic Back-Print Shirt-Jacket – Black – Unisex NP5200905","description":"\u003ch2\u003eBalenciaga BLCG Classic Back-Print Shirt-Jacket – Black\u003c\/h2\u003e\u003cp\u003eThe Balenciaga house name as a back credential. This black shirt-jacket is constructed from a \u003cstrong\u003ecustom double-face long-pile cotton shirting fabric\u003c\/strong\u003e — a proprietary construction that increases the pile density on both faces of the cloth to produce a surface that is thicker, more structured, and more wear-resistant than standard shirting cotton — and carries the full-width \u003cstrong\u003eBALENCIAGA wordmark in imported high-build rubber-base ink across the upper back panel\u003c\/strong\u003e. Front face: clean black, no graphic. Back face: the house name at full back width. The credential that is invisible until the wearer turns around.\u003c\/p\u003e\u003ch3\u003eWhy You'll Love It\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Double-Face Long-Pile Cotton Shirting:\u003c\/strong\u003e A proprietary double-face cotton construction in which both faces of the cloth carry an increased pile density — a woven structure that produces a fabric with more body, more surface uniformity, and more dimensional stability than a standard single-face or plain-weave shirting cotton. The increased pile on both faces gives the shirt-jacket a surface that lies flat without stiffening agents, holds its collar and placket structure upright without interfacing, and resists the surface abrasion and pilling that high-wear cotton shirting typically shows at collar edges, cuff edges, and pocket openings. A fabric built for a shirt-jacket that reads as outerwear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-Washed Fabric – Pre-Set Stability, Superior Hand-Feel:\u003c\/strong\u003e The full fabric run pre-washed before cutting and construction — a finishing process that pre-shrinks the cloth, pre-sets its dimensional response to moisture and heat, and breaks down the surface fiber structure to produce a softer, more worn-in hand-feel from the first wear. The result: a shirt-jacket that does not shrink further, does not warp at stress points, and does not fade unevenly. The stability and hand-feel of a garment that has already been worn in, delivered on first wear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImported High-Build Rubber-Base Ink Print – Upper Back Panel:\u003c\/strong\u003e The BALENCIAGA wordmark printed across the upper back panel in an imported high-build rubber-base ink formulation — a thick, opaque ink body that sits above the fabric surface as a raised, tactile layer rather than being absorbed into the cotton pile. The rubber-base chemistry produces a print that is flexible under wear and washing, bonded to the cotton fiber structure rather than adhered to its surface, and resistant to the cracking, peeling, and color-shift that standard plastisol or water-base prints show at high-wear zones. The wordmark reads in white against the black base at full contrast and full opacity regardless of wash count.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Temperature Interlining Bond – Machine-Pressed Fusing:\u003c\/strong\u003e All interlining positions — collar stand, collar leaf, front placket, cuff — bonded using a high-temperature fusing machine that applies consistent heat and pressure across the full interlining area simultaneously. The machine-press fusing process produces a bond that is more uniform, more bubble-free, and more dimensionally stable than hand-iron fusing: the interlining adheres to the shell fabric at every point across its area rather than at the points where a hand iron makes contact. The collar and placket that reads flat and structured on this shirt-jacket is the result of an interlining bond that has no delamination points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean Front Face – Back Credential Architecture:\u003c\/strong\u003e The front face of this shirt-jacket is entirely clean black — no wordmark, no badge, no graphic. The full Balenciaga house name is reserved for the back panel, where it runs at full upper-back width in the house’s most legible typographic form. The design architecture that makes the credential a reveal rather than an announcement: the front reads as a clean black shirt-jacket; the back reads as Balenciaga.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eButton-Through Front Placket – Shirt-Jacket Construction:\u003c\/strong\u003e A full button-through front placket with tonal black buttons — the construction that gives this garment its shirt-jacket identity: open, it layers over a hoodie or knit as an over-shirt; closed, it reads as a clean structured shirt. The button spacing and placket width calibrated to the relaxed oversized proportions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelaxed Oversized Silhouette:\u003c\/strong\u003e A relaxed, significantly oversized cut with a point collar, dropped shoulders, and a straight hem — the Balenciaga shirt-jacket proportions that read as deliberate volume rather than casual fit: wide enough to layer freely, long enough to read as outerwear rather than a shirt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnisex Design:\u003c\/strong\u003e Proportioned for both men and women — the Balenciaga BLCG classic back-print shirt-jacket in the definitive black-and-white colorway.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSize Guide\u003c\/h3\u003e\u003cp\u003e\u003cem\u003eNote: Balenciaga uses numeric sizing for this style. All measurements are taken flat. A 1–3 cm variance is within normal range.\u003c\/em\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eShoulder (cm)\u003c\/th\u003e\n\u003cth\u003eChest (cm)\u003c\/th\u003e\n\u003cth\u003eLength (cm)\u003c\/th\u003e\n\u003cth\u003eHeight (cm)\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e140\u003c\/td\u003e\n\u003ctd\u003e79\u003c\/td\u003e\n\u003ctd\u003e165–175\u003c\/td\u003e\n\u003ctd\u003e110–140\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e61\u003c\/td\u003e\n\u003ctd\u003e144\u003c\/td\u003e\n\u003ctd\u003e81\u003c\/td\u003e\n\u003ctd\u003e170–180\u003c\/td\u003e\n\u003ctd\u003e140–170\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e63\u003c\/td\u003e\n\u003ctd\u003e148\u003c\/td\u003e\n\u003ctd\u003e83\u003c\/td\u003e\n\u003ctd\u003e180–190\u003c\/td\u003e\n\u003ctd\u003e170–200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eCare Instructions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHand wash or machine wash cold (max 30°C)\u003c\/li\u003e\n\u003cli\u003eHang dry — do not tumble dry\u003c\/li\u003e\n\u003cli\u003eLow-temperature iron only — do not iron directly over back print\u003c\/li\u003e\n\u003cli\u003eDo not bleach\u003c\/li\u003e\n\u003cli\u003eSeparate colors when washing\u003c\/li\u003e\n\u003cli\u003eDry clean permitted\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eSKU: NP5200905  |  Available in sizes 1–3\u003c\/em\u003e\u003c\/p\u003e","brand":"Balenciaga","offers":[{"title":"S","offer_id":47504152690722,"sku":null,"price":139.0,"currency_code":"USD","in_stock":true},{"title":"M","offer_id":47504152723490,"sku":null,"price":139.0,"currency_code":"USD","in_stock":true},{"title":"L","offer_id":47504152756258,"sku":null,"price":139.0,"currency_code":"USD","in_stock":true},{"title":"XL","offer_id":47504152789026,"sku":null,"price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/7923\/0242\/files\/42_9f817b7b-3764-4bbc-9dc9-0631305913ea.jpg?v=1789117754"},{"product_id":"celine-ce-two-color-arched-print-crewneck-sweatshirt-blue-unisexry1191233-07gk-副本","title":"Balenciaga BLCG Layered Tape Hoodie – Black – Unisex871956TUVI91000","description":"\u003ch2\u003eBalenciaga BLCG Layered Tape Hoodie – Black\u003c\/h2\u003e\u003cp\u003eOne month of pre-production research. Three layers of hand-aligned material. A construction process that no 380gsm market substitute can replicate. This Balenciaga hoodie is built on a \u003cstrong\u003e550gsm 32-count double-ply cotton loop-knit fleece\u003c\/strong\u003e — a base fabric whose material cost alone approaches double that of the standard 380gsm weight — and carries a front chest graphic produced through a three-stage process: \u003cstrong\u003ewhite ink base print\u003c\/strong\u003e as the foundation layer, \u003cstrong\u003ecustom glossy oil-based transfer material digitally reverse-printed\u003c\/strong\u003e as the middle layer, and \u003cstrong\u003ethree hand-aligned layers of transfer material pressure-laminated with deliberate wrinkle formation\u003c\/strong\u003e as the final surface. The result is a graphic with three distinct surface qualities operating simultaneously: gloss, layered depth, and dimensional texture.\u003c\/p\u003e\u003ch3\u003eWhy You'll Love It\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e550gsm 32-Count Double-Ply Cotton Loop-Knit Fleece:\u003c\/strong\u003e A 550-gram loop-knit fleece constructed from 32-count double-ply cotton yarn — the weight class that places this hoodie firmly in outerwear territory. The 32-count yarn produces a finer, more uniform loop structure than lower-count cotton; the double-ply twist increases tensile strength and surface durability; the 550gsm total weight gives the fleece the body, drape, and thermal mass of a mid-layer jacket rather than a standard sweatshirt. The fabric cost approaches double the 380gsm market standard — not as a finishing premium, but as the base construction cost of a completely different category of garment. Do not compare this to 380gsm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite Ink Base Print – Foundation Layer:\u003c\/strong\u003e The BALENCIAGA letterforms printed directly onto the black cotton fleece surface in white ink as the first of three graphic layers — the opaque white foundation that establishes the letterform geometry and edge definition required for the two subsequent transfer layers to read correctly on a black base. Without a full-opacity white ink foundation, the transfer material layers above would read as semi-transparent overlays against the black fleece. The white base layer converts the black ground into a neutral surface that the transfer materials can register against at full color fidelity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Glossy Oil-Based Transfer Material – Digital Reverse Print:\u003c\/strong\u003e A custom glossy oil-based transfer material onto which the BALENCIAGA graphic is digitally printed in reverse — the digital file mirror-flipped before printing so that when the transfer is applied face-down onto the white ink base layer and pressure-bonded, the graphic reads correctly from the garment surface. The oil-based formulation produces a gloss level and surface tension that a water-base or standard plastisol transfer cannot produce: the gloss reads as a reflective surface finish rather than a sheen, and the oil-based film maintains its integrity and flexibility through the pressure-lamination and deliberate wrinkle-formation process that follows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Layer Hand-Aligned Pressure Lamination – Deliberate Wrinkle Formation:\u003c\/strong\u003e Three individual sheets of the glossy oil-based transfer material are hand-aligned over the white ink base layer and pressure-laminated in sequence — each layer positioned by hand to build the dimensional depth and surface complexity that a single-layer transfer cannot produce. The lamination is performed with deliberate wrinkle formation: each layer applied with intentional surface irregularities that, under pressure bonding, create a permanent three-dimensional relief texture in the final graphic surface. The wrinkles are a designed outcome, not a production artifact — specified and refined over more than a month of iterative process development.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss + Layered Depth + Dimensional Texture – Three Surface Qualities:\u003c\/strong\u003e The finished chest graphic operates at three simultaneous surface registers: \u003cstrong\u003egloss\u003c\/strong\u003e from the oil-based transfer film, which reflects light and reads as a lacquered finish against the matte black fleece ground; \u003cstrong\u003elayered depth\u003c\/strong\u003e from the three-transfer-sheet stack, which gives the graphic a dimensional presence that reads as thicker and more three-dimensional than any single-surface print; and \u003cstrong\u003edimensional texture\u003c\/strong\u003e from the deliberate wrinkle formation, which creates tactile surface relief that can be felt as well as seen. In direct light, all three qualities activate simultaneously. In raking or side light, the wrinkle texture casts micro-shadows that make the dimensional relief most legible.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelaxed Oversized Silhouette:\u003c\/strong\u003e A relaxed, significantly oversized cut with a lined drawstring hood, ribbed cuffs, and a ribbed hem — the Balenciaga hoodie proportions that carry the front chest graphic at the scale it requires, in the 550gsm weight that gives the silhouette its self-supporting structure and outerwear-grade presence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnisex Design:\u003c\/strong\u003e Proportioned for both men and women — the Balenciaga BLCG layered tape hoodie in the definitive black base that makes the gloss-and-texture graphic read at its maximum contrast and surface differentiation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSize Guide\u003c\/h3\u003e\u003cp\u003e\u003cem\u003eNote: Balenciaga uses numeric sizing for this style. All measurements are taken flat. A 1–3 cm variance is within normal range.\u003c\/em\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eShoulder (cm)\u003c\/th\u003e\n\u003cth\u003eChest (cm)\u003c\/th\u003e\n\u003cth\u003eLength (cm)\u003c\/th\u003e\n\u003cth\u003eHeight (cm)\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e140\u003c\/td\u003e\n\u003ctd\u003e79\u003c\/td\u003e\n\u003ctd\u003e165–175\u003c\/td\u003e\n\u003ctd\u003e110–140\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e61\u003c\/td\u003e\n\u003ctd\u003e144\u003c\/td\u003e\n\u003ctd\u003e81\u003c\/td\u003e\n\u003ctd\u003e170–180\u003c\/td\u003e\n\u003ctd\u003e140–170\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e63\u003c\/td\u003e\n\u003ctd\u003e148\u003c\/td\u003e\n\u003ctd\u003e83\u003c\/td\u003e\n\u003ctd\u003e180–190\u003c\/td\u003e\n\u003ctd\u003e170–200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eCare Instructions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHand wash or machine wash cold (max 30°C)\u003c\/li\u003e\n\u003cli\u003eHang dry — do not tumble dry\u003c\/li\u003e\n\u003cli\u003eLow-temperature iron only — do not iron directly over chest graphic\u003c\/li\u003e\n\u003cli\u003eDo not bleach\u003c\/li\u003e\n\u003cli\u003eSeparate colors when washing\u003c\/li\u003e\n\u003cli\u003eDry clean permitted\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eSKU: 871956TUVI91000  |  Available in sizes 1–3\u003c\/em\u003e\u003c\/p\u003e","brand":"Balenciaga","offers":[{"title":"XS","offer_id":47506466570274,"sku":null,"price":128.0,"currency_code":"USD","in_stock":true},{"title":"S","offer_id":47506374197282,"sku":null,"price":128.0,"currency_code":"USD","in_stock":true},{"title":"M","offer_id":47506374230050,"sku":null,"price":128.0,"currency_code":"USD","in_stock":true},{"title":"L","offer_id":47506374262818,"sku":null,"price":128.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/7923\/0242\/files\/78_4f8bd646-10bc-4c6e-8d40-e22e4101b9a0.jpg?v=1789127880"},{"product_id":"givenchy-fw25-couture-stitch-zip-hoodie-black-men-s-bmj0p53ysy-930-副本","title":"Balenciaga SS26 Holiday Zip Hoodie – Off-White – Women’s A0017WTUVT39000","description":"\u003ch2\u003eBalenciaga SS26 Holiday Zip Hoodie – Off-White\u003c\/h2\u003e\u003cp\u003eThe Balenciaga SS26 Holiday hoodie built around a single fabric specification that separates it from the category. The shell is constructed from a \u003cstrong\u003e32-count double-ply cotton loop fleece at 550 grams per square meter\u003c\/strong\u003e — a weight that is approximately 45% heavier than the 380gsm standard that defines the upper boundary of the conventional premium hoodie market. At 550gsm, the fabric is not a heavier version of a standard hoodie fabric: it is a structurally different material that holds its shape, drapes with a coat-like weight, and produces a silhouette that reads as structured outerwear rather than jersey layering. The \u003cstrong\u003ethermosetting ink print\u003c\/strong\u003e at the chest is heat-cured into the cotton fiber rather than sitting on the surface, ensuring the print’s color integrity and surface adhesion through repeated wear and washing cycles at the weight and density of the 550gsm substrate. A regular fit. The Balenciaga Holiday piece that reads as the season’s most fabric-investment-forward hoodie in the range.\u003c\/p\u003e\u003ch3\u003eWhy You’ll Love It\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e550gsm Double-Ply 32-Count Cotton Loop Fleece – 45% Heavier Than Category Standard:\u003c\/strong\u003e The hoodie shell constructed from a 32-count double-ply yarn woven into a loop fleece structure at 550 grams per square meter — the weight specification that is the primary quality argument and the primary differentiation claim of this piece. The benchmark for context: the premium hoodie market’s recognized upper standard runs at approximately 380gsm — the weight at which fabric cost, hand-feel, and drape are considered premium by the conventional market. At 550gsm, this fabric is 170gsm heavier per square meter: approximately 45% more cotton fiber per unit area, at a fabric cost approaching double the 380gsm standard. The 32-count yarn: yarn count specifies the fineness of the individual threads — a 32-count yarn produces a medium-fine thread that, when doubled (double-ply), creates a two-strand yarn with substantially greater tensile strength and dimensional stability than a single-ply equivalent. The double-ply construction at 32 count produces a loop fleece that holds its loop structure under compression and repeated washing rather than collapsing the loop pile to a flat, matted surface. At 550gsm in a double-ply loop fleece: the fabric has the body of a mid-weight wool coat, the drape weight of a structured outerwear shell, and the interior loop surface softness of a premium fleece — three material qualities that the 380gsm standard cannot simultaneously produce.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermosetting Ink Print – Balenciaga Script Credential, Heat-Cured into Fiber:\u003c\/strong\u003e The Balenciaga script print at the left chest executed in thermosetting (plastisol or thermosetting resin) ink — the print process in which the ink is heat-cured into the cotton fiber structure rather than dried on the fabric surface. Thermosetting ink curing: the ink is applied to the fabric and then subjected to a controlled high-temperature cure cycle (typically 160–165°C) that cross-links the ink polymer chains with the cotton fiber, anchoring the ink within the fiber matrix rather than leaving it as a surface film. The result is a print whose color integrity and surface adhesion are maintained through repeated washing and wear cycles: the thermosetting ink that does not crack, peel, or fade at the rate of standard water-based or discharge prints on a 550gsm substrate. On the off-white ground, the Balenciaga script in light blue reads as a tonal, cool-register credential — the same color-on-color logic as the Ralph Lauren light blue cardigan’s dark-on-blue polo pony, but inverted: a cool light print on a warm light ground, the two tones distinct enough to read the letterforms at close range without the graphic punch of a high-contrast credential. The script typeface: the Balenciaga cursive wordmark in its most relaxed, hand-lettering-adjacent form, the typeface register that reads as personal and seasonal rather than the house’s standard blockletter or neutral-sans credential format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e32-Count Double-Ply Yarn – Structural Integrity at 550gsm:\u003c\/strong\u003e The 32-count double-ply yarn specification that makes the 550gsm weight achievable without fabric failure. At 550gsm, a single-ply yarn loop fleece would have insufficient tensile strength in the individual loop pile threads to maintain the loop structure under the stress of repeated wear, washing, and compression: the loops would collapse, mat, or break at the pile base. The double-ply construction at 32 count produces a yarn strand with twice the tensile strength of the single-ply equivalent — the structural specification that allows the 550gsm loop density to maintain its pile height, loop integrity, and surface softness over the garment’s full wear life. The yarn specification that makes the 550gsm fabric not just heavy but durable at its weight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegular Fit – Structured Silhouette from Fabric Weight:\u003c\/strong\u003e A regular fit — the proportion that works with the 550gsm shell’s natural body rather than against it. At 550gsm, the fabric holds its own silhouette without the dropped shoulder or extreme oversize of a volume-forward cut: the regular fit that allows the fabric’s weight and drape to produce the structured, coat-like silhouette without relying on cut volume for its shape. The Balenciaga SS26 Holiday hoodie’s silhouette that reads as a structured outer layer in a regular fit at 550gsm, rather than as a relaxed layer that requires volume to read as premium.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSS26 Holiday – Balenciaga – Women’s:\u003c\/strong\u003e Part of the Balenciaga SS26 Holiday collection — the seasonal release that positions this as the Holiday-specific expression of the Balenciaga zip hoodie format in off-white, the script credential in holiday-register light blue, and the 550gsm fabric weight as the collection’s material investment statement. Designed and proportioned for women in S–L.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSize Guide\u003c\/h3\u003e\u003cp\u003e\u003cem\u003eNote: All measurements are taken flat. A 1–3 cm variance is within normal range.\u003c\/em\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eShoulder (cm)\u003c\/th\u003e\n\u003cth\u003eChest (cm)\u003c\/th\u003e\n\u003cth\u003eLength (cm)\u003c\/th\u003e\n\u003cth\u003eHeight (cm)\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eS\u003c\/td\u003e\n\u003ctd\u003e48\u003c\/td\u003e\n\u003ctd\u003e104\u003c\/td\u003e\n\u003ctd\u003e62\u003c\/td\u003e\n\u003ctd\u003e155–165\u003c\/td\u003e\n\u003ctd\u003e80–105\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e108\u003c\/td\u003e\n\u003ctd\u003e64\u003c\/td\u003e\n\u003ctd\u003e160–170\u003c\/td\u003e\n\u003ctd\u003e105–125\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL\u003c\/td\u003e\n\u003ctd\u003e52\u003c\/td\u003e\n\u003ctd\u003e112\u003c\/td\u003e\n\u003ctd\u003e66\u003c\/td\u003e\n\u003ctd\u003e165–175\u003c\/td\u003e\n\u003ctd\u003e125–145\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eFabric Composition\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eShell:\u003c\/strong\u003e 100% Cotton, 32-Count Double-Ply Loop Fleece, 550gsm\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCare Instructions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMachine wash cold (max 30°C) — turn inside out to protect thermosetting ink print surface\u003c\/li\u003e\n\u003cli\u003eHang dry flat — do not tumble dry; 550gsm fabric weight requires full flat-dry to maintain shape\u003c\/li\u003e\n\u003cli\u003eLow-temperature iron on reverse only — do not iron directly over print area\u003c\/li\u003e\n\u003cli\u003eDo not bleach\u003c\/li\u003e\n\u003cli\u003eSeparate colors when washing\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eSKU: A0017WTUVT39000  |  Available in sizes S–L  |  Women’s  |  Regular Fit  |  Balenciaga SS26 Holiday\u003c\/em\u003e\u003c\/p\u003e","brand":"Balenciaga","offers":[{"title":"XS","offer_id":47530007560226,"sku":null,"price":158.0,"currency_code":"USD","in_stock":true},{"title":"S","offer_id":47529373663266,"sku":null,"price":158.0,"currency_code":"USD","in_stock":true},{"title":"M","offer_id":47529373696034,"sku":null,"price":158.0,"currency_code":"USD","in_stock":true},{"title":"L","offer_id":47529373728802,"sku":null,"price":158.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/7923\/0242\/files\/184_beec886a-36e8-4c4d-be87-ceff5ef86dc2.jpg?v=1789296226"},{"product_id":"balenciaga-ss26-holiday-zip-hoodie-off-white-women-s-a0017wtuvt39000-副本","title":"Balenciaga BLCG Tattoo-Print Enzyme-Washed Pullover Hoodie – Black – Men’s850338TUVJ39020","description":"\u003ch2\u003eBalenciaga BLCG Tattoo-Print Enzyme-Washed Pullover Hoodie – Black\u003c\/h2\u003e\u003cp\u003eThe Balenciaga hoodie that uses the body as a surface for a full-placement tattoo-reference graphic system. The print is executed in \u003cstrong\u003edirect-to-garment (DTG) digital printing\u003c\/strong\u003e — the process that allows the tattoo motif’s fine linework, gradient transitions, and multi-element composition to be reproduced at the detail resolution that a screen-print or discharge print cannot achieve on a cotton fleece substrate. The shell is \u003cstrong\u003e100% cotton, enzyme-washed\u003c\/strong\u003e after construction — the wash that softens the hand-feel, slightly fades the black ground to the broken-in surface quality that makes the DTG print read as part of the fabric rather than applied to it, and reduces the print-hand contrast that a raw-finish cotton surface would produce between the printed and unprinted zones. A relaxed, generous oversize fit. The Balenciaga BLCG hoodie that reads as a wearable tattoo composition rather than a branded graphic garment.\u003c\/p\u003e\u003ch3\u003eWhy You’ll Love It\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDTG Digital Print – Tattoo Motif at Full Linework Resolution:\u003c\/strong\u003e The BLCG Tattoo graphic executed in direct-to-garment digital printing — the process in which pigment ink is applied directly to the cotton fabric surface by a digital print head, at a resolution determined by the print head’s DPI specification rather than by the mesh count of a screen or the complexity of a discharge chemistry. DTG at full print resolution on a cotton fleece substrate allows the tattoo motif’s characteristic fine linework (the thin outline strokes that define individual motif elements), soft gradient transitions (the tonal blending from dense black fill to lighter halftone areas that produces the tattoo aesthetic’s dimensional quality), and multi-element compositional density (the overlapping and adjacent motifs at varying scales across the print field) to be reproduced with the fidelity that the original tattoo-reference artwork requires. The print process that is specifically selected for this type of graphic: screen-printing requires each color to be a separate screen pass, making fine-line multi-tone tattoo graphics prohibitively complex; discharge printing removes color rather than adding it, limiting tonal range on a black ground. DTG adds full-color ink at variable density in a single pass — the only process that can deliver the full linework resolution of the tattoo motif at this garment scale.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnzyme Wash – Broken-In Surface \u0026amp; DTG Print Integration:\u003c\/strong\u003e The 100% cotton shell enzyme-washed after garment assembly and DTG printing — the finishing process that serves a double function on this garment. As on the Givenchy FW25 hoodie in this catalog: cellulase enzymes degrade and remove surface cotton fiber ends, producing a softer hand-feel, a slightly faded black ground with the broken-in surface quality of a worn cotton garment, and a subtle tonal variation across the black field. For the DTG print specifically: enzyme washing after printing slightly softens the ink layer’s surface interface with the surrounding fabric, reducing the tactile boundary between the printed and unprinted zones. The result is a print that reads as more integrated with the fabric surface than an unwashed DTG print, whose ink surface can read as a distinct, slightly raised film over the fabric. The enzyme-washed DTG print: the tattoo graphic that reads as part of the black cotton surface rather than as a print applied to it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100% Cotton Shell – Natural Fiber, Optimal DTG Substrate:\u003c\/strong\u003e The hoodie body in 100% cotton — the natural fiber that is the standard substrate for DTG digital printing because cotton fiber’s hydroxyl groups chemically bond with the reactive or pigment ink used in DTG printing, producing superior ink adhesion and wash-fastness compared to synthetic or synthetic-blend fabrics. On a 100% cotton surface, DTG ink penetrates into the fiber rather than sitting exclusively on the surface, producing a print that is wash-fast at the washing temperatures appropriate for cotton care (cold to 30°C) and that maintains its color density and linework definition through repeated washing cycles. The natural fiber that takes the enzyme wash’s softening and fading effect cleanly and uniformly — the cotton that responds to cellulase enzyme treatment in the predictable, consistent manner that produces the even broken-in surface of the brief.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoordinated Ribbed Trim – Matched Cotton Family:\u003c\/strong\u003e Ribbed cuffs and hem in a matching cotton rib — the coordinated trim in the same fiber family as the shell, enzyme-washed to the same broken-in surface quality. The cuff and hem rib that closes the Oversize body at the wrist and hip with a fitted elasticated edge, producing the silhouette that reads as intentionally Oversize rather than shapeless. On the enzyme-washed black ground, the rib reads as a tonal, matched termination: the same broken-in black at the trim as at the body, without the raw-versus-washed color difference that an enzyme-washed shell with an unwashed rib would produce.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelaxed Oversize Fit – Canvas for Full-Placement Composition:\u003c\/strong\u003e A relaxed, generous Oversize cut — the silhouette that provides the surface area and body volume that the BLCG Tattoo composition requires to read at its intended scale. At the chest measurements across the size range, the Oversize fit gives the tattoo graphic the full-front canvas that a fitted body would compress: each motif element at the scale the artwork specifies, the compositional relationships between elements preserved across the full front panel. The hoodie silhouette that reads as a deliberate surface choice rather than a garment default.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalenciaga BLCG – Men’s:\u003c\/strong\u003e The BLCG Tattoo hoodie in black — the Balenciaga sub-line that carries the house’s streetwear-adjacent, graphic-forward pieces within the main collection. Men’s, in sizes S–L.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSize Guide\u003c\/h3\u003e\u003cp\u003e\u003cem\u003eNote: All measurements are taken flat. A 1–3 cm variance is within normal range.\u003c\/em\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eShoulder (cm)\u003c\/th\u003e\n\u003cth\u003eChest (cm)\u003c\/th\u003e\n\u003cth\u003eLength (cm)\u003c\/th\u003e\n\u003cth\u003eHeight (cm)\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eS\u003c\/td\u003e\n\u003ctd\u003e62\u003c\/td\u003e\n\u003ctd\u003e126\u003c\/td\u003e\n\u003ctd\u003e72\u003c\/td\u003e\n\u003ctd\u003e160–170\u003c\/td\u003e\n\u003ctd\u003e100–130\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM\u003c\/td\u003e\n\u003ctd\u003e64\u003c\/td\u003e\n\u003ctd\u003e130\u003c\/td\u003e\n\u003ctd\u003e74\u003c\/td\u003e\n\u003ctd\u003e165–175\u003c\/td\u003e\n\u003ctd\u003e130–155\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL\u003c\/td\u003e\n\u003ctd\u003e66\u003c\/td\u003e\n\u003ctd\u003e134\u003c\/td\u003e\n\u003ctd\u003e76\u003c\/td\u003e\n\u003ctd\u003e170–180\u003c\/td\u003e\n\u003ctd\u003e155–180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eFabric Composition\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShell:\u003c\/strong\u003e 100% Cotton, Enzyme-Washed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim:\u003c\/strong\u003e Coordinated Cotton Rib\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCare Instructions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMachine wash cold (max 30°C) — turn inside out to protect DTG print surface\u003c\/li\u003e\n\u003cli\u003eHang dry flat — do not tumble dry\u003c\/li\u003e\n\u003cli\u003eDo not iron directly over printed area\u003c\/li\u003e\n\u003cli\u003eDo not bleach\u003c\/li\u003e\n\u003cli\u003eSeparate colors when washing\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eSKU: 850338TUVJ39020  |  Available in sizes S–L  |  Men’s  |  Relaxed Oversize Fit  |  Balenciaga BLCG\u003c\/em\u003e\u003c\/p\u003e","brand":"Balenciaga","offers":[{"title":"S","offer_id":47533200703522,"sku":null,"price":168.0,"currency_code":"USD","in_stock":true},{"title":"M","offer_id":47533200736290,"sku":null,"price":168.0,"currency_code":"USD","in_stock":true},{"title":"L","offer_id":47533200769058,"sku":null,"price":168.0,"currency_code":"USD","in_stock":true},{"title":"XL","offer_id":47533294845986,"sku":null,"price":168.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/7923\/0242\/files\/1_abf6e55a-7aa8-4008-bcb2-b41500e34a3e.jpg?v=1789303120"},{"product_id":"balenciaga-blcg-tattoo-print-enzyme-washed-pullover-hoodie-black-men-s850338tuvj39020-副本","title":"Balenciaga SS26 BLCG Front-Back Embroidered Stand-Collar Zip Jacket – Stone – Men’s 844162TSVP19012","description":"\u003ch2\u003eBalenciaga SS26 BLCG Front-Back Embroidered Stand-Collar Zip Jacket – Stone\u003c\/h2\u003e\u003cp\u003eThe Balenciaga SS26 jacket that resolves the tension between embroidery precision and surface distress. The shell is constructed from a \u003cstrong\u003e400gsm double-ply Paris cotton fleece\u003c\/strong\u003e — Balenciaga’s house-specific cotton fleece specification, a double-strand yarn construction at heavyweight that produces the fabric body, drape weight, and surface density required to carry the garment’s \u003cstrong\u003efront and back imported embroidery\u003c\/strong\u003e without the fabric pulling, puckering, or distorting at the embroidery attachment points. The fabric is then \u003cstrong\u003estone-washed and distressed\u003c\/strong\u003e after embroidery — the wash sequence that is the most technically demanding process decision in this garment’s production: the embroidery must be executed first, on a clean fabric surface where tension can be controlled precisely, then the wash and distress treatment applied to the assembled garment while maintaining the embroidery’s structural integrity through the mechanical abrasion of the stone-wash cycle. The stone ground. The “BALENCIAGA” wordmark at the back in large-format imported embroidery. The Balenciaga jacket that reads as worn-in from day one and as precisely manufactured at every embroidery point.\u003c\/p\u003e\u003ch3\u003eWhy You’ll Love It\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e400gsm Double-Ply Paris Cotton Fleece – Balenciaga House-Specification Weight:\u003c\/strong\u003e The jacket shell in a 400gsm double-ply cotton fleece — Balenciaga’s house-designated “Paris cotton” fleece specification, the double-strand yarn construction at this weight that produces three simultaneous fabric properties required by this garment. First, fabric body at 400gsm: the mass per unit area that gives the jacket its structured, outerwear-adjacent drape — the garment that hangs with the weight of a light mid-layer rather than the lightness of a standard sweatshirt. Second, double-ply construction: two yarn strands twisted together before weaving, producing a fabric with greater tensile strength and dimensional stability than a single-ply equivalent at the same weight — the yarn structure that allows the stone-wash and distress treatment to abrade the fabric surface without compromising the fabric’s structural integrity at the seams and hem. Third, embroidery substrate suitability: at 400gsm in a double-ply construction, the fabric has sufficient density and body to carry front and back large-format embroidery without the needle penetration and thread tension of the embroidery pulling the fabric out of shape — the substrate that allows the embroidery to sit flat and precisely on the fabric surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront \u0026amp; Back Imported Embroidery – Dual-Placement Credential System:\u003c\/strong\u003e Imported embroidery at both the front chest and the full back — the dual-placement credential system that makes this jacket’s embroidery architecture distinct from single-chest or single-back credential placement. At the front: the “BALENCIAGA” or BLCG wordmark in a smaller format at the left chest — the close-range credential that reads on approach. At the back: the “BALENCIAGA” wordmark in large-format display scale across the full back panel — the distance-readable credential that reads from behind at medium range, the primary visual element of the jacket when worn. Imported embroidery thread: the thread specification that determines stitch-color fastness, surface sheen, and the embroidery’s resistance to the stone-wash and distress cycle’s mechanical abrasion. The imported thread selected for its ability to maintain stitch integrity and color depth through the wash treatment that the surrounding fabric is designed to distress — the embroidery that emerges from the stone-wash cycle with its thread count and edge definition intact against the abraded fabric ground.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStone-Wash \u0026amp; Distress Treatment – Applied After Embroidery, Fabric Surface Distress with Embroidery Integrity:\u003c\/strong\u003e The 400gsm Paris cotton fleece shell stone-washed and distressed after garment assembly and embroidery completion — the production sequence that is the most precise process decision in this jacket. Stone-washing after embroidery rather than before: the fabric is presented to the stone-wash cycle as an assembled, embroidered garment, so the mechanical abrasion of the pumice stones acts on the fleece surface to produce the characteristic faded, slightly broken-down surface of a stone-washed cotton — the slight color variation, the surface fiber disruption, the hand-feel softening — while the embroidery’s thread structure, backed by the embroidery stabilizer at the attachment point, resists the same abrasion and maintains its raised, defined surface. The result: a stone ground that reads as naturally worn and broken-in, with embroidery credentials that read as clean, precise, and structurally intact — the garment that has been worn and the embroidery that has not.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStand Collar – Full-Zip, Clean Front Structure:\u003c\/strong\u003e A stand collar with a full-length center-front zip — the collar construction that closes at the throat for full neck coverage without the hood volume of the BLCG Tattoo pullover. The stand collar that reads as a jacket collar rather than a sweatshirt collar: the structured neck profile that frames the front chest embroidery at the upper chest zone and positions the garment’s silhouette as outerwear-adjacent rather than casualwear. The full-length zip that opens the jacket completely for layering over shirts, base layers, or knitwear, and closes for a clean, flat front face with both the stand collar and the front chest credential visible against the stone fleece ground.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUtility Pockets – Front Body, Functional Addition:\u003c\/strong\u003e Front pockets on the jacket body — the functional addition that gives this piece its utility register. The pockets that read as design-appropriate on the 400gsm fleece jacket’s structured, outerwear-adjacent silhouette — the storage function integrated into the jacket’s format without interrupting the front panel’s clean embroidery zone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoordinated Ribbed Trim – Matched Cotton Family:\u003c\/strong\u003e Ribbed cuffs and hem in a matching cotton rib — the trim in the same cotton family as the 400gsm Paris cotton shell, stone-washed to the same broken-in surface quality as the body. The rib that closes the Oversize jacket at the wrist and hip with a fitted elasticated edge, producing the silhouette that reads as intentionally relaxed rather than shapeless, and that maintains the stone-washed color family from shell to trim termination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelaxed Fit – Men’s:\u003c\/strong\u003e A relaxed, generous fit — the silhouette that gives the 400gsm Paris cotton shell its intended volume and drape. At the chest measurements across the four size range (126–138 cm), the relaxed fit produces the Balenciaga SS26 jacket’s outerwear-adjacent proportion: a substantial garment that layers over knitwear and base layers without restriction, and that carries the back embroidery’s full-panel wordmark across the full back surface area that the relaxed fit provides. Men’s, in sizes 1–4.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSize Guide\u003c\/h3\u003e\u003cp\u003e\u003cem\u003eNote: All measurements are taken flat. A 1–3 cm variance is within normal range.\u003c\/em\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eShoulder (cm)\u003c\/th\u003e\n\u003cth\u003eChest (cm)\u003c\/th\u003e\n\u003cth\u003eLength (cm)\u003c\/th\u003e\n\u003cth\u003eHeight (cm)\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e67\u003c\/td\u003e\n\u003ctd\u003e126\u003c\/td\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003ctd\u003e160–170\u003c\/td\u003e\n\u003ctd\u003e100–125\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e68\u003c\/td\u003e\n\u003ctd\u003e130\u003c\/td\u003e\n\u003ctd\u003e71\u003c\/td\u003e\n\u003ctd\u003e165–175\u003c\/td\u003e\n\u003ctd\u003e125–150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e69\u003c\/td\u003e\n\u003ctd\u003e134\u003c\/td\u003e\n\u003ctd\u003e72\u003c\/td\u003e\n\u003ctd\u003e170–180\u003c\/td\u003e\n\u003ctd\u003e150–175\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003ctd\u003e138\u003c\/td\u003e\n\u003ctd\u003e73\u003c\/td\u003e\n\u003ctd\u003e175–185\u003c\/td\u003e\n\u003ctd\u003e175–200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eFabric Composition\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShell:\u003c\/strong\u003e 100% Cotton, 400gsm Double-Ply Paris Cotton Fleece, Stone-Washed \u0026amp; Distressed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim:\u003c\/strong\u003e Coordinated Cotton Rib\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCare Instructions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMachine wash cold (max 30°C) — turn inside out to protect embroidery surface\u003c\/li\u003e\n\u003cli\u003eHang dry flat — do not tumble dry\u003c\/li\u003e\n\u003cli\u003eLow-temperature iron on reverse only — do not iron directly over embroidery\u003c\/li\u003e\n\u003cli\u003eDo not bleach\u003c\/li\u003e\n\u003cli\u003eSeparate colors when washing\u003c\/li\u003e\n\u003cli\u003eDry clean recommended to preserve stone-wash distress finish and embroidery integrity\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eSKU: 844162TSVP19012  |  Available in sizes 1–4  |  Men’s  |  Relaxed Fit  |  Balenciaga SS26 BLCG\u003c\/em\u003e\u003c\/p\u003e","brand":"Balenciaga","offers":[{"title":"1","offer_id":47533622820898,"sku":null,"price":145.0,"currency_code":"USD","in_stock":true},{"title":"2","offer_id":47533622853666,"sku":null,"price":145.0,"currency_code":"USD","in_stock":true},{"title":"3","offer_id":47533622886434,"sku":null,"price":145.0,"currency_code":"USD","in_stock":true},{"title":"4","offer_id":47533622919202,"sku":null,"price":145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/7923\/0242\/files\/11_2e895afe-7472-4af7-ab01-74fa508566ab.jpg?v=1789303530"},{"product_id":"balenciaga-ss26-blcg-front-back-embroidered-stand-collar-zip-jacket-stone-men-s-844162tsvp19012-副本","title":"Balenciaga SS26 BLCG 3B Dissolve-Print Pullover Hoodie – Black\/Pink – Men’s871956TUVJ91000","description":"\u003ch2\u003eBalenciaga SS26 BLCG 3B Dissolve-Print Pullover Hoodie – Black\/Pink\u003c\/h2\u003e\u003cp\u003eThe Balenciaga SS26 hoodie whose production sequence is a two-stage credential system. The shell is constructed from a \u003cstrong\u003e32-count double-ply cotton loop fleece at 550gsm\u003c\/strong\u003e — the same ultra-heavyweight fabric specification as the SS26 Holiday zip hoodie in this catalog, at the weight that is 45% heavier than the 380gsm premium market standard and at approximately double the fabric cost. On this 550gsm substrate, the garment carries two distinct surface credentials executed in a precise sequence: first, the \u003cstrong\u003eTAJIMA machine embroidery\u003c\/strong\u003e at the left chest — the professional embroidery equipment that delivers the Balenciaga credential at stitch-density and edge-definition quality; then, after the embroidery is complete, the \u003cstrong\u003ewater-base discharge print\u003c\/strong\u003e is applied across the back, sleeves, and body, producing the pink dissolve-graphic that reads as the garment’s primary visual system. The sequence — embroidery first, print second — is the production decision that allows the print to be applied to the full garment surface without print-field interruption, while the embroidery credential at the chest reads as a physically raised, thread-surface mark above the print layer. The BLCG 3B dissolve composition. The sleeve typography. The 550gsm ground that carries both.\u003c\/p\u003e\u003ch3\u003eWhy You’ll Love It\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e550gsm 32-Count Double-Ply Cotton Loop Fleece – Ultra-Heavyweight Substrate for Dual-Process Production:\u003c\/strong\u003e The hoodie shell in the same 32-count double-ply cotton loop fleece at 550 grams per square meter as the SS26 Holiday zip hoodie — the fabric specification that positions both pieces at the same material investment level within the SS26 Balenciaga range. At 550gsm: 45% heavier than the 380gsm premium market standard, at a fabric cost approaching double. The 32-count double-ply construction: two yarn strands at medium-fine count twisted together before weaving, producing a loop fleece with greater tensile strength, pile height retention, and dimensional stability than a single-ply equivalent. On this hoodie, the 550gsm double-ply specification serves a production function in addition to its weight and hand-feel properties: the fabric’s high density and double-ply structural integrity provide the stable, non-distorting substrate that the two-stage TAJIMA embroidery → water-base print production sequence requires. A fabric that shifts, distorts, or loses dimensional stability between the embroidery and print stages would produce misregistration between the embroidery position and the print field. At 550gsm double-ply, the substrate maintains its dimensions across both production stages.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTAJIMA Machine Embroidery – Professional-Grade Credential at Left Chest:\u003c\/strong\u003e The Balenciaga credential embroidery at the left chest executed on a TAJIMA embroidery machine — professional commercial embroidery equipment manufactured by Tajima Industries, the Japanese embroidery machine manufacturer whose equipment is the industry standard for high-density, precision embroidery in luxury and premium garment production. TAJIMA machines deliver stitch density control, thread tension consistency, and registration accuracy that position them alongside Barudan (used on the Ralph Lauren polo pony cardigans in this catalog) at the top tier of commercial embroidery equipment. On the 550gsm black cotton loop fleece, the TAJIMA embroidery credential reads as a dimensionally raised mark: the embroidery thread sitting above the fleece pile surface, readable at close range as a precisely defined, high-density surface construction. The TAJIMA credential executed before the water-base print is applied: the embroidery substrate that is clean, flat, and tension-stable when the embroidery needle penetrates it, without the print layer’s surface modification affecting the embroidery’s backing adhesion or thread tension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Base Discharge Print – 3B Dissolve Graphic \u0026amp; Sleeve Typography, Applied After Embroidery:\u003c\/strong\u003e The BLCG 3B dissolve graphic at the back and the typographic sleeve print executed in water-base (discharge or water-base pigment) ink — applied after the TAJIMA embroidery is complete. Water-base print on cotton: the ink is water-carried and penetrates the cotton fiber rather than sitting on the fabric surface as a film, producing a print with a soft hand-feel (no print-hand stiffness over the printed area) and a surface that reads as part of the fabric rather than applied to it. On the 550gsm black loop fleece, the water-base print in pink produces the dissolve graphic’s characteristic soft-edge, semi-transparent quality: the pink ink in the dissolve zones reads as a color that is emerging from or dissolving into the black ground rather than as a flat opaque shape placed on it. The 3B motif at the back: the Balenciaga sub-line’s graphic mark in the dissolve treatment, the primary visual element of the hoodie viewed from behind. The sleeve typography: the BLCG or Balenciaga wordmark running along the sleeve length in the same pink water-base ink, readable at close range as a secondary credential that continues the pink color system from back to sleeve.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduction Sequence – Embroidery First, Print Second:\u003c\/strong\u003e The two-stage production sequence that determines how both credentials read on the finished garment. Embroidery first: the TAJIMA machine works on the clean 550gsm fabric, needle penetration and thread tension controlled precisely against an unmodified substrate surface. Print second: the water-base print is applied to the full assembled garment, covering the body, back, and sleeves in the dissolve graphic and typography. The print field runs up to but not over the embroidery at the left chest — the embroidery’s backing and physical height above the fleece pile surface creating a natural demarcation between the printed ground and the raised embroidery mark. The finished garment: a printed surface throughout, with an embroidery credential at the chest that reads as a dimensional mark above the print rather than a mark within it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDropped Shoulder – Relaxed Oversize Silhouette, Sleeve Print Canvas:\u003c\/strong\u003e A dropped shoulder construction — the seam position below the natural shoulder point that widens the upper body and lengthens the sleeve. On this hoodie, the dropped shoulder has a print-specific consequence: the lengthened sleeve provides additional surface area for the sleeve typography to run its full length without being interrupted by the sleeve seam position. The relaxed Oversize body that gives the 3B dissolve back graphic the full panel area to read at its intended scale.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKangaroo Pocket – Front Center, Clean Front Panel:\u003c\/strong\u003e A single kangaroo pocket at the front center — the pocket format that crosses the full front panel width, providing storage function without the side-seam pocket openings that would interrupt the front panel’s clean surface and the left-chest embroidery’s positioning. The front panel below the embroidery credential that reads as an uninterrupted surface, the kangaroo pocket’s opening at the hem zone rather than mid-panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoordinated Ribbed Trim – Matched Cotton Family:\u003c\/strong\u003e Ribbed cuffs and hem in a matching cotton rib — the trim in the same cotton family as the 550gsm shell. The rib that closes the Oversize dropped-shoulder body at the wrist and hip, producing the silhouette definition that keeps the 550gsm volume reading as intentional structure rather than excess fabric.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegular Fit – Men’s:\u003c\/strong\u003e A regular fit at the generous chest measurements of the size range (130–142 cm) — the proportion appropriate to the 550gsm shell’s natural body at a regular cut. Men’s, in sizes XS–L.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSize Guide\u003c\/h3\u003e\u003cp\u003e\u003cem\u003eNote: All measurements are taken flat. A 1–3 cm variance is within normal range.\u003c\/em\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eShoulder (cm)\u003c\/th\u003e\n\u003cth\u003eChest (cm)\u003c\/th\u003e\n\u003cth\u003eLength (cm)\u003c\/th\u003e\n\u003cth\u003eHeight (cm)\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eXS\u003c\/td\u003e\n\u003ctd\u003e63\u003c\/td\u003e\n\u003ctd\u003e130\u003c\/td\u003e\n\u003ctd\u003e67\u003c\/td\u003e\n\u003ctd\u003e160–170\u003c\/td\u003e\n\u003ctd\u003e100–125\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eS\u003c\/td\u003e\n\u003ctd\u003e65\u003c\/td\u003e\n\u003ctd\u003e134\u003c\/td\u003e\n\u003ctd\u003e69\u003c\/td\u003e\n\u003ctd\u003e165–175\u003c\/td\u003e\n\u003ctd\u003e125–150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM\u003c\/td\u003e\n\u003ctd\u003e66\u003c\/td\u003e\n\u003ctd\u003e138\u003c\/td\u003e\n\u003ctd\u003e71\u003c\/td\u003e\n\u003ctd\u003e170–180\u003c\/td\u003e\n\u003ctd\u003e150–175\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL\u003c\/td\u003e\n\u003ctd\u003e68\u003c\/td\u003e\n\u003ctd\u003e142\u003c\/td\u003e\n\u003ctd\u003e73\u003c\/td\u003e\n\u003ctd\u003e175–185\u003c\/td\u003e\n\u003ctd\u003e175–200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eFabric Composition\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShell:\u003c\/strong\u003e 100% Cotton, 32-Count Double-Ply Loop Fleece, 550gsm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim:\u003c\/strong\u003e Coordinated Cotton Rib\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCare Instructions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMachine wash cold (max 30°C) — turn inside out to protect embroidery and water-base print surface\u003c\/li\u003e\n\u003cli\u003eHang dry flat — do not tumble dry; 550gsm fabric weight requires full flat-dry to maintain shape\u003c\/li\u003e\n\u003cli\u003eDo not iron directly over embroidery or printed areas\u003c\/li\u003e\n\u003cli\u003eDo not bleach\u003c\/li\u003e\n\u003cli\u003eSeparate colors when washing\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eSKU: 871956TUVJ91000  |  Available in sizes XS–L  |  Men’s  |  Regular Fit  |  Balenciaga SS26 BLCG\u003c\/em\u003e\u003c\/p\u003e","brand":"Balenciaga","offers":[{"title":"XS","offer_id":47533759922210,"sku":null,"price":145.0,"currency_code":"USD","in_stock":true},{"title":"S","offer_id":47533759954978,"sku":null,"price":145.0,"currency_code":"USD","in_stock":true},{"title":"M","offer_id":47533759987746,"sku":null,"price":145.0,"currency_code":"USD","in_stock":true},{"title":"L","offer_id":47533760020514,"sku":null,"price":145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/7923\/0242\/files\/21_55d3e5cd-1e6d-4c1a-b369-0e46a75c18db.jpg?v=1789304022"},{"product_id":"balenciaga-ss26-blcg-3b-dissolve-print-pullover-hoodie-black-pink-men-s871956tuvj91000-副本","title":"Balenciaga BLCG Loop Series Ring-Embroidery Pullover Hoodie – Black – Men’s NP5400911","description":"\u003ch2\u003eBalenciaga BLCG Loop Series Ring-Embroidery Pullover Hoodie – Black\u003c\/h2\u003e\u003cp\u003eThe Balenciaga BLCG Loop series hoodie whose credential is defined by restraint. On a garment where the 3B Dissolve hoodie uses a full-placement print across back and sleeves, and the Tattoo hoodie covers the entire front body in a DTG composition, the Loop series piece carries a single embroidered ring motif at the left chest — the \u003cstrong\u003eBLCG loop circle embroidery\u003c\/strong\u003e executed in a tonal-on-black register that reads at close range as a precisely manufactured surface mark and at medium distance as a near-invisible credential. The shell is constructed from the \u003cstrong\u003e32-count double-ply cotton loop fleece\u003c\/strong\u003e in a custom-dyed color-consistent weave — the fabric specification shared with the 550gsm BLCG pieces in this catalog at the yarn construction level, here at the weight appropriate for the Loop series’ cleaner, more restrained format. A relaxed Oversize body. The black hoodie that makes the embroidery’s existence the entire design argument.\u003c\/p\u003e\u003ch3\u003eWhy You’ll Love It\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e32-Count Double-Ply Cotton Loop Fleece – Custom Color-Consistent Weave:\u003c\/strong\u003e The hoodie body in a 32-count double-ply cotton loop fleece with a custom-dyed, color-consistent weave specification — the fabric whose yarn construction is shared across the BLCG SS26 range at this catalog session’s highest-specification end. The 32-count yarn: a medium-fine thread count that, doubled (double-ply), produces a yarn strand with substantially greater tensile strength and dimensional stability than a single-ply equivalent. The double-ply loop fleece at this weight: a fabric with a dense, even loop pile surface that holds its pile height and surface uniformity through repeated wear and washing cycles rather than collapsing to the matted, flat surface of a lower-specification fleece. The custom color-consistent weave: the fabric dyed or constructed to a color specification that produces a uniform, even black across the full fabric surface — the dye consistency that matters on a near-tonal embroidery piece where any variation in the black ground would read as inconsistency against the tonal ring embroidery. The black ground whose uniformity makes the ring embroidery’s near-tonal presence the only surface variation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBLCG Loop Circle Embroidery – Single-Mark Tonal Credential, Close-Range Precision:\u003c\/strong\u003e The loop series’ defining credential: a single embroidered ring (circle or oval loop motif) at the left chest in a tonal thread — the embroidery that reads as near-black on black at medium distance and as a precisely manufactured surface construction at close range. The tonal credential register: the embroidery thread in a color closely matched to the black ground, producing a credential whose visibility is distance-dependent — invisible to the eye that is not looking for it, present and precisely defined to the eye that is. This is the opposite register from the SS26 Holiday hoodie’s white-on-black script credential and the 3B Dissolve hoodie’s pink-on-black print system: those credentials maximize visibility through color contrast; the Loop series credential minimizes it through tonal proximity, making the embroidery a mark for the close-range viewer rather than a graphic for the medium-distance one. The single-mark placement: one embroidery element at the left chest, the remainder of the black surface entirely uninterrupted. The restraint that positions the Loop series as the most minimal credential expression within the BLCG SS26 range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoop Series – BLCG Sub-Line Credential Architecture:\u003c\/strong\u003e The Loop series as a distinct credential system within the BLCG range — the sub-line identifier that signals a specific design approach: single motif, tonal register, minimal surface intervention. Across the BLCG pieces in this catalog, the credential architecture ranges from full-surface (Tattoo DTG print, 3B Dissolve back graphic and sleeve typography) to dual-placement (front-back embroidery on the SS26 zip jacket) to single-mark tonal (this Loop series piece). The Loop series at the minimal end: the hoodie whose design decision is the decision not to add surface complexity beyond the single ring embroidery mark.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelaxed Oversize Fit – Clean Black Surface at Full Volume:\u003c\/strong\u003e A relaxed, generous Oversize cut — the silhouette that gives the 32-count double-ply loop fleece its intended body and drape volume. On a minimal-credential piece like the Loop series hoodie, the Oversize fit’s primary visual consequence is the uninterrupted black surface area it produces: the large, clean black panels at the front, back, and sleeves that carry no print and no embroidery except the single ring mark at the left chest. The Oversize silhouette that makes the absence of surface complexity into a positive visual statement — the black that reads as a deliberate, considered ground rather than a blank one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrawstring Hood – Proportional Volume:\u003c\/strong\u003e A full drawstring hood — the hood volume consistent with the Oversize body’s generous proportions. The drawstring that allows the hood opening to be adjusted from fully closed to fully open, and that adds the hardware element of the drawstring cord and aglets as the one visible metal-adjacent detail on a garment that carries no other print, graphic, or high-contrast element beyond the tonal ring embroidery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoordinated Ribbed Trim – Matched Cotton Family:\u003c\/strong\u003e Ribbed cuffs and hem in a matching cotton rib — the coordinated trim in the same color-consistent black cotton family as the shell. The rib that terminates the Oversize body at the wrist and hip with a fitted elasticated edge, and that maintains the color-consistent black of the shell through to the trim edge without the color differential that a standard stock rib might introduce against a custom-dyed shell.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMen’s – Balenciaga BLCG Loop:\u003c\/strong\u003e The BLCG Loop series pullover hoodie in black — designed and proportioned for men in sizes XS–L. The most restrained credential expression in the BLCG SS26 range at this catalog session.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSize Guide\u003c\/h3\u003e\u003cp\u003e\u003cem\u003eNote: All measurements are taken flat. A 1–3 cm variance is within normal range.\u003c\/em\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eShoulder (cm)\u003c\/th\u003e\n\u003cth\u003eChest (cm)\u003c\/th\u003e\n\u003cth\u003eLength (cm)\u003c\/th\u003e\n\u003cth\u003eHeight (cm)\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eXS\u003c\/td\u003e\n\u003ctd\u003e54\u003c\/td\u003e\n\u003ctd\u003e130\u003c\/td\u003e\n\u003ctd\u003e67\u003c\/td\u003e\n\u003ctd\u003e160–170\u003c\/td\u003e\n\u003ctd\u003e100–125\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eS\u003c\/td\u003e\n\u003ctd\u003e56\u003c\/td\u003e\n\u003ctd\u003e134\u003c\/td\u003e\n\u003ctd\u003e69\u003c\/td\u003e\n\u003ctd\u003e165–175\u003c\/td\u003e\n\u003ctd\u003e125–150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM\u003c\/td\u003e\n\u003ctd\u003e58\u003c\/td\u003e\n\u003ctd\u003e138\u003c\/td\u003e\n\u003ctd\u003e71\u003c\/td\u003e\n\u003ctd\u003e170–180\u003c\/td\u003e\n\u003ctd\u003e150–175\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e142\u003c\/td\u003e\n\u003ctd\u003e73\u003c\/td\u003e\n\u003ctd\u003e175–185\u003c\/td\u003e\n\u003ctd\u003e175–200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eFabric Composition\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShell:\u003c\/strong\u003e 100% Cotton, 32-Count Double-Ply Loop Fleece, Custom Color-Consistent Weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim:\u003c\/strong\u003e Coordinated Cotton Rib\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCare Instructions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMachine wash cold (max 30°C) — turn inside out to protect tonal embroidery surface\u003c\/li\u003e\n\u003cli\u003eHang dry flat — do not tumble dry\u003c\/li\u003e\n\u003cli\u003eLow-temperature iron on reverse only — do not iron directly over embroidery\u003c\/li\u003e\n\u003cli\u003eDo not bleach\u003c\/li\u003e\n\u003cli\u003eSeparate colors when washing\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eSKU: NP5400911  |  Available in sizes XS–L  |  Men’s  |  Relaxed Oversize Fit  |  Balenciaga BLCG Loop\u003c\/em\u003e\u003c\/p\u003e","brand":"Balenciaga","offers":[{"title":"XS","offer_id":47533760086050,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true},{"title":"S","offer_id":47533760118818,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true},{"title":"M","offer_id":47533760151586,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true},{"title":"L","offer_id":47533760184354,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/7923\/0242\/files\/32_189b57f1-281e-46a4-992a-9050841a6dee.jpg?v=1789304394"},{"product_id":"ancellm-2025-heavy-stone-wash-distressed-tapered-denim-washed-grey-sg6400911-副本-1","title":"Balenciaga SS24 Letter-Print Spliced Denim \u0026 Fleece Wide-Leg Jeans – Washed Indigo \/ Black – Unisex 783697THW254245","description":"\u003ch2\u003eBalenciaga SS24 Letter-Print Spliced Denim \u0026amp; Fleece Wide-Leg Jeans – Washed Indigo \/ Black\u003c\/h2\u003e\u003cp\u003eThe Balenciaga SS24 denim that is built from two fundamentally different fabric architectures joined at a single seam. The front panel: \u003cstrong\u003ewashed indigo cotton denim\u003c\/strong\u003e — a mid-weight denim in a classic washed indigo colorway with a whisker-fade wash treatment and a vertical \u003cstrong\u003eBALENCIAGA letterform print\u003c\/strong\u003e running down the right leg face from hip to hem. The back panel and inner-leg construction: \u003cstrong\u003epure cotton black loop fleece\u003c\/strong\u003e — the heather-black loop-knit fabric typically used for sweatpants and hoodies, here used as the rear and inner-leg construction of a denim silhouette. The two fabrics joined at the outseam and inseam in a visible splice construction. Mid-rise waist. Wide-leg silhouette. Zip fly. Side and front pockets. A relaxed, gender-neutral fit. The SS24 Balenciaga denim that wears like two garments simultaneously — a washed indigo jean from the front, a black loop-fleece trouser from the back.\u003c\/p\u003e\u003ch3\u003eWhy You’ll Love It\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDenim-Front, Fleece-Back Splice Construction – Two Fabric Architectures, One Seam:\u003c\/strong\u003e The defining construction element of this SS24 Balenciaga denim: the front panel in washed indigo cotton denim and the back panel and inner-leg in pure cotton black loop fleece, joined at the outseam and inseam in a visible splice seam that is the piece’s most legible construction statement. The splice seam as a design decision: the seam that the standard denim construction conceals (the outseam that runs the full length of the leg at the outer thigh) is here the seam that marks the material transition — the exact line where the indigo denim face ends and the black fleece back begins. From the front: a washed indigo wide-leg denim. From the back: a black loop-fleece wide-leg trouser. From the side: the splice seam as a visible boundary line between the two fabric constructions. The denim-fleece material combination as a Balenciaga design system statement: the house’s consistent SS24 direction of building garments that read as category-crossing objects — the denim that is also a sweatpant, the sweatpant that is also a denim, the silhouette that cannot be placed in a single garment category because it is literally constructed from two.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBALENCIAGA Vertical Letter Print – Right Leg Face, Hip to Hem:\u003c\/strong\u003e The BALENCIAGA wordmark printed vertically down the right leg face of the washed indigo denim front panel, running from the hip pocket zone to the hem in a single continuous letterform column. The vertical orientation: the print direction that uses the leg’s length as the letterform’s scale — the wordmark that reads at full height only from a distance that allows the entire leg to read as a single visual unit. The dark-thread letterform on the washed indigo denim: the credential that reads as part of the denim’s surface rather than applied over it — the print whose contrast against the washed indigo ground is calibrated to read as present but not loud, visible as the house credential at close and medium range. The vertical leg print as the SS24 Balenciaga denim’s front-facing credential: the single element on the indigo front panel that identifies the piece as Balenciaga before the splice seam and the fleece back are visible.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWashed Indigo Denim Front – Whisker-Fade Wash, Classic Denim Register:\u003c\/strong\u003e The front panel in a classic washed indigo cotton denim with a whisker-fade wash treatment — the high-contrast fading at the front thigh creases (whiskers) and the lower-contrast overall surface fade that reads as a naturally aged denim rather than a clean, unwashed indigo. The washed indigo as the SS24 piece’s front-facing color: the color register that reads as denim from the front at any distance, before the black fleece back’s material identity is visible. The whisker-fade wash: the processing that gives the indigo front panel its vintage-reference surface character — the wash treatment that Balenciaga applies to a denim whose back construction is the most unconventional element, while the front maintains the visual legibility of a classic washed denim.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePure Cotton Black Loop Fleece Back – Sweatpant Material in a Denim Silhouette:\u003c\/strong\u003e The back panel and inner-leg construction in pure cotton black loop fleece — the heather-black loop-knit fabric whose material identity is unmistakably sweatpant-adjacent: soft hand-feel, loop-knit surface, cotton warmth, and the slight surface texture of a loop fleece visible at the back leg and seat. The black loop fleece as the back panel material choice: the construction decision that makes this garment perform differently when worn than a standard denim — the fleece back providing the comfort and warmth retention of a loop-knit fabric at the seat and inner-leg zones that are in direct contact with the body, while the denim front provides the structure and visual weight of a woven fabric at the zones that are visible from the front. The black loop fleece in the denim silhouette context: the material that reads as a coordinated sweatpant set when the back of the garment is visible, the material contrast that makes this piece a two-garment system in a single silhouette.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMid-Rise Wide-Leg Silhouette – Relaxed, Gender-Neutral, Coordinated-Set Proportions:\u003c\/strong\u003e Mid-rise waist: the rise standard that sits between a high-rise and a low-rise, providing a relaxed waist position without the extreme high-rise that would compete with the washed indigo front panel’s vertical letter print. Wide-leg: the leg silhouette that provides the maximum fabric surface for both the washed indigo denim front and the black loop fleece back to read at their full visual presence — the leg width that allows both materials to drape rather than conform to the leg, the silhouette that reads as intentionally generous rather than accidentally oversized. Gender-neutral: the mid-rise wide-leg proportions in a waist range (74–86 cm across XS–L) that works for both male and female bodies. Zip fly with front and side pockets: the functional hardware in the standard denim format, executed in the washed indigo front panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoordinated Set Design – The Denim as the Bottom Half of a Two-Piece System:\u003c\/strong\u003e The SS24 Balenciaga denim and fleece splice trouser designed as a coordinated-set bottom: the washed indigo and black two-material construction that reads as a matching set when paired with a black loop-fleece Balenciaga top — the denim-fleece jeans as the foundation of a two-piece system whose upper half is a black loop-fleece sweatshirt or hoodie and whose lower half is a garment that contains both materials simultaneously. The coordinated-set positioning: the Balenciaga SS24 direction that builds the set into the bottom rather than requiring the buyer to source a matching top — the trouser that is already half sweatpant.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSize Guide\u003c\/h3\u003e\u003cp\u003e\u003cem\u003eNote: All measurements are taken flat. A 1–3 cm variance is within normal range.\u003c\/em\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eWaist (cm)\u003c\/th\u003e\n\u003cth\u003eLength (cm)\u003c\/th\u003e\n\u003cth\u003eHeight (cm)\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eXS\u003c\/td\u003e\n\u003ctd\u003e74\u003c\/td\u003e\n\u003ctd\u003e109\u003c\/td\u003e\n\u003ctd\u003e160–170\u003c\/td\u003e\n\u003ctd\u003e100–130\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eS\u003c\/td\u003e\n\u003ctd\u003e78\u003c\/td\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003ctd\u003e165–175\u003c\/td\u003e\n\u003ctd\u003e130–150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM\u003c\/td\u003e\n\u003ctd\u003e82\u003c\/td\u003e\n\u003ctd\u003e111\u003c\/td\u003e\n\u003ctd\u003e170–180\u003c\/td\u003e\n\u003ctd\u003e150–170\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL\u003c\/td\u003e\n\u003ctd\u003e86\u003c\/td\u003e\n\u003ctd\u003e113\u003c\/td\u003e\n\u003ctd\u003e175–185\u003c\/td\u003e\n\u003ctd\u003e170–190\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eFabric Composition\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Panel:\u003c\/strong\u003e Cotton Denim, Washed Indigo, Whisker-Fade Wash Treatment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack Panel \u0026amp; Inner Leg:\u003c\/strong\u003e 100% Cotton Black Loop Fleece\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplice Construction:\u003c\/strong\u003e Visible Outseam \u0026amp; Inseam Material Splice — Denim Front \/ Fleece Back\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCredential:\u003c\/strong\u003e BALENCIAGA Vertical Letterform Print — Right Leg Face, Hip to Hem\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCare Instructions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHand wash cold (max 30°C) — turn inside out; the denim-fleece splice seam requires gentle handling to preserve outseam integrity at the material join\u003c\/li\u003e\n\u003cli\u003eHang dry flat — do not tumble dry; heat may cause differential shrinkage between the denim and loop-fleece panels\u003c\/li\u003e\n\u003cli\u003eDo not bleach — bleaching will destroy the washed indigo denim’s fade treatment and the black loop fleece’s color\u003c\/li\u003e\n\u003cli\u003eSeparate dark colors when washing — both indigo denim and black loop fleece release residual dye in early wash cycles\u003c\/li\u003e\n\u003cli\u003eDo not iron over the vertical letterform print or the splice seam\u003c\/li\u003e\n\u003cli\u003eDry clean recommended to preserve splice seam construction, letterform print, and both panel materials\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eSKU: 783697THW254245  |  Available in sizes XS–L  |  Unisex  |  Mid-Rise Wide-Leg  |  Balenciaga SS24\u003c\/em\u003e\u003c\/p\u003e","brand":"Balenciaga","offers":[{"title":"XS","offer_id":47601493770274,"sku":null,"price":139.0,"currency_code":"USD","in_stock":true},{"title":"S","offer_id":47601493803042,"sku":null,"price":139.0,"currency_code":"USD","in_stock":true},{"title":"M","offer_id":47601493835810,"sku":null,"price":139.0,"currency_code":"USD","in_stock":true},{"title":"L","offer_id":47601493868578,"sku":null,"price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/7923\/0242\/files\/51_f04a6dc8-242f-4ee3-a9c5-aa0dcc5b5916.jpg?v=1789478318"},{"product_id":"dior-fw26-embroidered-fringe-hem-plaid-oxford-shirt-navy-693d592a3089-c580-副本","title":"Balenciaga FW26 BLCG Letter-Stripe Mohair-Blend Crewneck Sweater – Grey Multi A0093IT18121581","description":"\u003ch2\u003eBalenciaga FW26 BLCG Letter-Stripe Mohair-Blend Crewneck Sweater – Grey Multi\u003c\/h2\u003e\u003cp\u003eThe Balenciaga FW26 sweater built from a fabric specification that begins with the fiber. The shell is a \u003cstrong\u003ecustom-woven mohair-blend yarn\u003c\/strong\u003e — described in the Balenciaga production brief as “暮岚茧序奔织马海毛混绪材质” — a bespoke mohair-mix specification whose characteristic surface is the mohair fiber’s natural halo: the fine, light-catching filaments that project slightly above the knit’s surface and give the fabric its signature soft-focus, blurred-edge visual quality. Knitted on a \u003cstrong\u003eGerman-imported jacquard machine\u003c\/strong\u003e into a multi-stripe pattern that graduates from grey through white to black across the body and sleeves. The credential: a \u003cstrong\u003eBALENCIAGA letterform intarsia stripe\u003c\/strong\u003e running across the upper chest and shoulders — the house name repeated horizontally in a dense, close-set letterform band that reads as a stripe from a distance and as text at close range. The finishing: a \u003cstrong\u003egarment-wash softening and deodorizing treatment\u003c\/strong\u003e applied to the finished knit, improving hand-feel and surface quality beyond what the mohair-blend yarn provides in its raw state. Ribbed cuffs. Regular fit. Unisex. The FW26 Balenciaga sweater that places the house’s letterform credential inside the stripe structure rather than over it.\u003c\/p\u003e\u003ch3\u003eWhy You’ll Love It\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBespoke Mohair-Blend Yarn – The Fiber That Defines This Sweater’s Surface Character:\u003c\/strong\u003e Mohair: the fiber from the Angora goat, characterized by a fine, long, lustrous filament structure that produces the surface halo — the projecting fibers above the knit’s surface that catch light differently from the knit’s ground, producing the soft-focus, slightly blurred visual quality that distinguishes mohair-blend knitwear from wool or cotton equivalents at equivalent gauge. The Balenciaga FW26 mohair-blend specification: a bespoke yarn mix that combines the mohair fiber’s halo surface with the blend’s structural properties — the dimension and recovery that pure mohair’s long filament lacks. The mohair halo’s effect on the multi-stripe pattern: the stripe boundaries read as slightly soft-edged rather than crisp, the grey, white, and black stripes blending at their edges through the projecting mohair filaments rather than transitioning at a hard line — the stripe construction that reads as a painterly graduation rather than a graphic block pattern. The mohair halo on the BALENCIAGA letterform intarsia: the white letterforms in the upper chest band read through the mohair’s halo as slightly raised and textured above the surrounding stripe field, the intarsia’s contrast between flat and hairy surface adding a tactile dimension to the credential band that a flat-knit intarsia cannot produce.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGerman-Imported Jacquard Machine – The Multi-Stripe + Letterform Intarsia in a Single Production Process:\u003c\/strong\u003e The German-imported jacquard machine: the production equipment that encodes both the multi-stripe color sequence and the BALENCIAGA letterform intarsia band into the fabric’s stitch structure simultaneously — the machine that produces the graduating grey \/ white \/ black stripe sequence across the body and sleeves while building the dense letterform band at the upper chest and shoulder zone in a single continuous knitting process. The jacquard’s letterform intarsia: the BALENCIAGA text repeated across the full width of the chest in a dense, close-set letterform arrangement where the letters are so closely set that the text reads as a stripe from distance and as a repeating BALENCIAGA credential at reading range. The production specification’s outcome: the knit’s surface is “more vivid and three-dimensional” — the jacquard’s letterform intarsia band adding a surface relief against the surrounding stripe field through the intarsia’s yarn-transition structure and the mohair halo’s differential fiber projection at the intarsia zone boundaries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Stripe Graduation – Grey Through White to Black, Body and Sleeves Continuous:\u003c\/strong\u003e The stripe sequence runs from a grey tone at the upper body (immediately below the BALENCIAGA letterform band) through a white mid-section to a black lower body and cuffs — a four-to-five stripe graduation that reads as a tonal descent from light to dark across the sweater’s vertical axis. The mohair-blend’s halo at each stripe boundary: the transition zones between grey and white, white and black read as graduated rather than hard-edged — the stripe construction that produces a sweater whose color reads as a painterly tonal graduation rather than a graphic block-stripe pattern. The sleeve stripe: continuous with the body’s stripe sequence at the shoulder seam, the sleeve carrying the same grey-to-black graduation from shoulder to ribbed cuff. The ribbed cuff: in the darkest stripe register (black), the rib trim providing the structural elasticity at the wrist while maintaining the stripe sequence’s color conclusion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBALENCIAGA Letterform Intarsia Stripe – The Credential That Reads as Structure:\u003c\/strong\u003e The BALENCIAGA letterform band at the upper chest and shoulder zone is the sweater’s defining design element and its most conceptually sophisticated credential deployment: the house name used not as a discrete placed motif but as a \u003cstrong\u003estructural stripe element\u003c\/strong\u003e — the letterforms so densely repeated across the full chest width that the text functions as a stripe in the sweater’s overall stripe composition, readable as a light-toned band from distance and as repeating BALENCIAGA text at close and medium range. The letterform band’s position: at the upper chest and shoulder zone, where the garment’s widest horizontal register provides the maximum text repetitions across the stripe’s width — the placement that maximizes the credential’s horizontal presence while positioning it at the zone most visible when the sweater is worn under or partially covered by outerwear. The intarsia’s surface quality in the mohair-blend: the white letterform yarn against the grey mohair-blend ground at the upper chest zone, the intarsia boundary producing a tactile relief against the surrounding hairy surface that makes the letterform band three-dimensional at close range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGarment-Wash Softening + Deodorizing Treatment – The Finishing That Improves Hand-Feel Beyond Raw Fiber:\u003c\/strong\u003e The garment-wash treatment applied to the finished mohair-blend sweater: an aqueous softening and deodorizing process that improves the knit’s hand-feel and surface appearance beyond what the raw mohair-blend yarn provides in its unknitted, unfinished state. The softening component: relaxing the mohair-blend’s knit structure to its final dimensional state, improving the surface’s tactile softness and the halo’s filament distribution. The deodorizing component: removing residual fiber processing agents (spinning oils, sizing treatments) from the mohair-blend yarn that would otherwise affect the garment’s initial wear experience. The garment-wash as a Balenciaga quality standard: the finishing step that ensures the sweater’s hand-feel at first wear is the hand-feel the buyer experiences for the garment’s life — not a pre-wash state that requires the buyer’s own wash cycle to achieve.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRibbed Cuffs + Regular Fit + Unisex – The FW26 Silhouette Standard:\u003c\/strong\u003e Ribbed cuffs at the wrist: the elasticated rib trim in the black stripe register that provides the sleeve’s close fit at the wrist and completes the grey-to-black stripe graduation at the sleeve’s end point. Regular fit: the silhouette that sits between an oversized and a fitted crewneck — the proportions that work across male and female bodies in the S–XL range (shoulder 37–43 cm, chest 88–100 cm, length 58–64 cm). Unisex: the FW26 Balenciaga knitwear direction that positions the BLCG letterform stripe sweater for the broadest possible demographic without compromising the stripe sequence’s visual presence or the credential band’s positioning.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSize Guide\u003c\/h3\u003e\u003cp\u003e\u003cem\u003eNote: All measurements are taken flat. A 1–3 cm variance is within normal range.\u003c\/em\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eShoulder (cm)\u003c\/th\u003e\n\u003cth\u003eChest (cm)\u003c\/th\u003e\n\u003cth\u003eLength (cm)\u003c\/th\u003e\n\u003cth\u003eHeight (cm)\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eS\u003c\/td\u003e\n\u003ctd\u003e37\u003c\/td\u003e\n\u003ctd\u003e88\u003c\/td\u003e\n\u003ctd\u003e58\u003c\/td\u003e\n\u003ctd\u003e160–170\u003c\/td\u003e\n\u003ctd\u003e100–120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM\u003c\/td\u003e\n\u003ctd\u003e39\u003c\/td\u003e\n\u003ctd\u003e92\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e165–175\u003c\/td\u003e\n\u003ctd\u003e120–140\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL\u003c\/td\u003e\n\u003ctd\u003e41\u003c\/td\u003e\n\u003ctd\u003e96\u003c\/td\u003e\n\u003ctd\u003e62\u003c\/td\u003e\n\u003ctd\u003e170–180\u003c\/td\u003e\n\u003ctd\u003e140–160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eXL\u003c\/td\u003e\n\u003ctd\u003e43\u003c\/td\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003ctd\u003e64\u003c\/td\u003e\n\u003ctd\u003e175–185\u003c\/td\u003e\n\u003ctd\u003e160–180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eFabric Composition\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShell:\u003c\/strong\u003e Bespoke Mohair-Blend Yarn — Custom Mix, Surface Halo, Soft-Focus Stripe Character\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e German-Imported Jacquard Machine — Multi-Stripe Sequence + BALENCIAGA Letterform Intarsia Band, Single Production Process\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStripe Sequence:\u003c\/strong\u003e Grey \/ White \/ Black Tonal Graduation — Body and Sleeves Continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCredential:\u003c\/strong\u003e BALENCIAGA Letterform Intarsia Stripe — Dense Horizontal Repeat, Upper Chest and Shoulder Zone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinishing:\u003c\/strong\u003e Garment-Wash Softening + Deodorizing Treatment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCare Instructions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHand wash cold (max 30°C) — gentle cycle; mohair-blend fiber’s long filament structure is susceptible to felting under agitation — minimal movement only\u003c\/li\u003e\n\u003cli\u003eLay flat to dry — do not hang; the mohair-blend’s weight when wet will cause permanent length distortion if hung\u003c\/li\u003e\n\u003cli\u003eDo not tumble dry — heat and mechanical agitation cause irreversible felting of mohair fiber\u003c\/li\u003e\n\u003cli\u003eDo not bleach — oxidizing agents destroy the mohair filament’s structure and the multi-stripe’s color balance\u003c\/li\u003e\n\u003cli\u003eDo not iron directly — steam lightly from 3–4 cm distance to relax the mohair halo after washing; direct contact will flatten the surface halo permanently\u003c\/li\u003e\n\u003cli\u003eStore flat or loosely folded — do not compress the mohair halo under sustained weight; compression will reduce the surface’s characteristic filament projection\u003c\/li\u003e\n\u003cli\u003eDry clean recommended for long-term preservation of the mohair halo’s surface quality and the jacquard’s letterform intarsia definition\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eSKU: A0093IT18121581  |  Available in sizes S–XL  |  Unisex  |  Regular Fit  |  Balenciaga FW26\u003c\/em\u003e\u003c\/p\u003e","brand":"Balenciaga","offers":[{"title":"S","offer_id":47615766265890,"sku":null,"price":145.0,"currency_code":"USD","in_stock":true},{"title":"M","offer_id":47615766298658,"sku":null,"price":145.0,"currency_code":"USD","in_stock":true},{"title":"L","offer_id":47615766331426,"sku":null,"price":145.0,"currency_code":"USD","in_stock":true},{"title":"XL","offer_id":47615766364194,"sku":null,"price":145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/7923\/0242\/files\/118_62cf146a-342b-4500-a0ca-7b7b3030199a.jpg?v=1789569302"},{"product_id":"moncler-fw26-classic-small-badge-zip-track-jacket-creamxbk5200915-副本","title":"Balenciaga FW26 Rainbow Chalk-Effect Logo Long-Sleeve T-Shirt – WhiteA009CTTVVK99000","description":"\u003ch2\u003eBalenciaga FW26 Rainbow Chalk-Effect Logo Long-Sleeve T-Shirt – White\u003c\/h2\u003e\u003cp\u003eThe Balenciaga FW26 long-sleeve tee whose print argument is built on a deliberate paradox: a precision multi-pass industrial printing process deployed to produce the appearance of something spontaneous, imprecise, and hand-made. The shell: a \u003cstrong\u003ehigh-GSM combed double-yarn plain-weave 100% cotton\u003c\/strong\u003e — the fabric specification that produces a hand-feel described as “soft and yielding yet naturally structured, not soft-collapsed or body-clinging”, the cotton weight and weave density whose combination provides surface body without stiffness. The print: \u003cstrong\u003esix-color sequential rainbow printing in a chalk-abrasion resin-paste process\u003c\/strong\u003e — purple, blue, green, yellow, red, and the intermediate transitions between them, each color layer printed independently and in sequence, with deliberate edge-bleeding, particulate mottling, and partial soft-focus edge effects applied to produce a surface that reads as vintage street-art chalk or marker lettering rather than a clean contemporary screenprint. The construction: a \u003cstrong\u003edouble-layer reinforced ribbed crewneck with internal hidden binding tape\u003c\/strong\u003e, \u003cstrong\u003eback-neck bartack reinforcement\u003c\/strong\u003e, and \u003cstrong\u003edrop-shoulder double-channel felled seams at the shoulder line\u003c\/strong\u003e — the construction system that the production brief identifies explicitly as preventing collar deformation, collar roll-back, and seam failure under repeated movement. Unisex. XS–L. The FW26 Balenciaga piece that makes a graffiti-spontaneity argument through industrial precision.\u003c\/p\u003e\u003ch3\u003eWhy You’ll Love It\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-GSM Combed Double-Yarn Plain-Weave Cotton – The Fabric That Is Simultaneously Soft and Structurally Self-Supporting:\u003c\/strong\u003e The fabric specification: combed cotton (the fiber processing stage that removes short fiber ends and aligns remaining fibers in parallel before spinning, producing a smoother, stronger yarn than carded-only cotton); double-yarn construction (two spun yarns plied together before weaving, producing a thread whose diameter, tensile strength, and surface smoothness exceed single-yarn equivalents at the same nominal count); plain-weave structure (the most fundamental over-under weave whose interlocking thread system produces maximum thread-to-thread contact and therefore maximum fabric body at a given yarn weight); high GSM (the weight-per-area specification that positions this fabric at the heavy end of the T-shirt cotton range, the weight that produces the “full, firm texture” that the production brief describes as “solid in the hand”). The hand-feel outcome: the combination of combed yarn’s surface smoothness, double-yarn’s structural strength, plain-weave’s body, and high GSM’s weight produces a fabric that is “soft and yielding to the touch yet naturally structured” — the cotton that does not collapse against the body under its own weight, does not cling to the skin’s contours, and maintains its flat drape across the chest and back panels as a self-supporting fabric plane rather than a body-conforming second skin. The high-GSM cotton’s print-surface advantage: the fabric’s density and smooth combed surface provide the most stable substrate for the multi-pass resin-paste rainbow print’s edge effects — the controlled bleeding, mottling, and soft-focus edges of the chalk-abrasion process require a fabric whose surface is consistent and flat enough to receive each color layer’s paste application without the thread irregularities of a lower-quality cotton causing uncontrolled ink migration beyond the designed edge-bleed zones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix-Color Sequential Rainbow Chalk-Abrasion Resin-Paste Print – Industrial Precision Producing Spontaneous-Appearance Results:\u003c\/strong\u003e The print system: six color passes (purple → blue → green → yellow → red, plus intermediate transition zones), each color layer printed independently using a resin-paste (rubber-base paste) ink system, in sequence on the fabric’s surface. The resin-paste ink system’s base properties: a rubber-compound binder that sits on top of the fabric’s surface rather than penetrating into the fiber structure, producing an ink layer with tactile surface presence (the paste is physically above the fabric plane, creating a slight relief at the print zone) and opacity appropriate to printing on a white cotton ground without the white ground’s color bleeding through the ink layer. The chalk-abrasion effect’s three specific production techniques: (1) \u003cstrong\u003eEdge bleeding\u003c\/strong\u003e (晒染) — a controlled reduction of ink density at each letterform’s outer boundary, producing an edge that fades from full color to partial coverage rather than stopping at a clean line — the edge behavior of chalk or dry marker on a rough surface; (2) \u003cstrong\u003eParticulate mottling\u003c\/strong\u003e (颜粒班驳) — intentional variation in ink density within each color zone, producing areas of higher and lower coverage that read as the natural unevenness of a chalked or brushed surface rather than the uniform coverage of a precision screenprint; (3) \u003cstrong\u003ePartial soft-focus edge\u003c\/strong\u003e (局部虚边) — specific zones within each letterform’s boundary where the ink application is deliberately reduced to near-zero, producing “missing” sections that read as the worn-away zones of a chalk mark that has been partially erased or has dried unevenly. The combined outcome: a print surface that “perfectly reproduces the casual, spontaneous texture of street-art chalk or marker lettering applied by hand,” as the production brief specifies — the six-color rainbow’s precise color sequence (purple at top, red at bottom, the visible-spectrum order that reads as deliberate art-direction) rendered in an ink system and with production techniques that make the execution read as improvised and physical rather than digital and controlled. The rainbow’s color progression as the print’s typographic structure: each line of the Balenciaga logotype is printed in a different color zone of the rainbow progression, the color change between lines acting as a visual separator that gives the stacked repeated-logotype composition a rhythmic structure — the same letterform repeated six times, differentiated by color position in the rainbow rather than by scale, weight, or spatial variation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-Layer Reinforced Ribbed Crewneck with Internal Hidden Binding Tape – The Collar System That Prevents Three Distinct Failure Modes:\u003c\/strong\u003e The collar construction: a double-layer ribbed crewneck — two layers of rib knit assembled at the collar zone, providing twice the structural mass of a single-layer rib and distributing the lateral stretch forces that pulling the garment on and off applies to the collar across twice the material depth. The internal hidden binding tape: a woven tape applied to the collar’s interior seam, enclosing the raw edges of both rib layers and the body fabric at the collar attachment seam within a bound finish — the tape that prevents the collar attachment seam’s raw edge from fraying, from rolling toward the exterior, and from stretching beyond its design dimension through repeated wearing. The dense, even stitch lines: the production brief’s specification of “fine, regular stitch lines” at the collar attachment — the stitch density that distributes the collar’s attachment load across the maximum number of thread pass-throughs per unit length, reducing the per-stitch load and therefore the risk of individual stitch failure at the collar’s highest-stress zone (the back collar center, where pulling-on forces concentrate). The back-neck bartack reinforcement: the \u003cstrong\u003eback-neck bartack\u003c\/strong\u003e (后领打枣工艺) — a dense cross-stitch reinforcement applied specifically at the back collar’s center point, the point where the label attachment and the collar’s pulling-force concentration combine to create the collar system’s highest-stress single point. The bartack at this point: the reinforcement that the production brief describes as “preventing collar pull-out and roll-back” — the construction detail that the premium T-shirt category uses to extend collar structural life beyond the standard single-layer crewneck’s failure timeline. The three failure modes this system prevents simultaneously: (1) collar stretch-out (prevented by double-layer mass and internal binding tape); (2) collar seam fraying (prevented by internal binding tape’s raw-edge enclosure); (3) collar roll-back at the back neck (prevented by bartack reinforcement at the back-neck stress concentration point).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-Shoulder Double-Channel Felled Seams – The Shoulder Construction That Distributes Movement Load and Prevents Seam Failure:\u003c\/strong\u003e The shoulder construction: \u003cstrong\u003eclassic drop-shoulder cut with double-channel felled seams at the shoulder seam line\u003c\/strong\u003e. Drop-shoulder: the sleeve attachment point released below the natural shoulder point — the construction that provides ease of arm movement in all directions by eliminating the constraint that a set-in sleeve’s seam creates at the natural shoulder point, appropriate to the relaxed-fit proportions of the FW26 design (shoulder 59–65 cm across XS–L). Double-channel felled seams: two parallel rows of stitching at the shoulder seam, each row independently locking the seam’s structural layers together — the felled seam format that the production brief describes as distributing the load of arm movement more evenly across the seam’s width (受力更均匀) and that “resists seam failure under large-range movement” (大幅度活动不易崩线). The double-channel’s mechanical advantage over single-row seam stitching: when one row of stitching is subjected to stress at a specific point (a lateral arm extension, a lifting motion), the second parallel row continues to hold the seam’s structural alignment even if the first row’s thread reaches its elastic limit at that stress point — the redundant structural system that provides the seam’s failure resistance that the production brief specifies as the shoulder construction’s primary functional advantage. The drop-shoulder’s interaction with the double-channel felled seam: the drop-shoulder’s released attachment point reduces the peak stress at the seam by moving the fulcrum of arm-movement load away from the natural shoulder’s high-concentration zone, while the double-channel distributes the remaining load across two parallel rows — the two construction decisions that together reduce the shoulder seam’s failure probability to the minimum achievable within the T-shirt format’s structural parameters.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSize Guide\u003c\/h3\u003e\u003cp\u003e\u003cem\u003eNote: All measurements are taken flat. A 1–3 cm variance is within normal range.\u003c\/em\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eShoulder (cm)\u003c\/th\u003e\n\u003cth\u003eChest (cm)\u003c\/th\u003e\n\u003cth\u003eLength (cm)\u003c\/th\u003e\n\u003cth\u003eHeight (cm)\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eXS\u003c\/td\u003e\n\u003ctd\u003e59\u003c\/td\u003e\n\u003ctd\u003e124\u003c\/td\u003e\n\u003ctd\u003e75\u003c\/td\u003e\n\u003ctd\u003e160–170\u003c\/td\u003e\n\u003ctd\u003e120–150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eS\u003c\/td\u003e\n\u003ctd\u003e61\u003c\/td\u003e\n\u003ctd\u003e128\u003c\/td\u003e\n\u003ctd\u003e77\u003c\/td\u003e\n\u003ctd\u003e165–175\u003c\/td\u003e\n\u003ctd\u003e150–170\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM\u003c\/td\u003e\n\u003ctd\u003e63\u003c\/td\u003e\n\u003ctd\u003e132\u003c\/td\u003e\n\u003ctd\u003e79\u003c\/td\u003e\n\u003ctd\u003e170–180\u003c\/td\u003e\n\u003ctd\u003e170–190\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL\u003c\/td\u003e\n\u003ctd\u003e65\u003c\/td\u003e\n\u003ctd\u003e136\u003c\/td\u003e\n\u003ctd\u003e81\u003c\/td\u003e\n\u003ctd\u003e175–185\u003c\/td\u003e\n\u003ctd\u003e190–220\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eMaterial \u0026amp; Construction Composition\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShell:\u003c\/strong\u003e 100% Cotton — High-GSM Combed Double-Yarn Plain-Weave, Soft-Yielding Yet Self-Supporting, Full Firm Texture, Not Body-Clinging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint:\u003c\/strong\u003e Six-Color Sequential Rainbow — Chalk-Abrasion Resin-Paste Process, Purple→Blue→Green→Yellow→Red Progression, Edge Bleeding + Particulate Mottling + Partial Soft-Focus Edge, Street-Art Spontaneous Appearance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCollar:\u003c\/strong\u003e Double-Layer Reinforced Ribbed Crewneck — Internal Hidden Binding Tape, Dense Even Stitch Lines, Back-Neck Bartack Reinforcement, Three-Mode Failure Prevention\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShoulder:\u003c\/strong\u003e Drop-Shoulder Cut, Double-Channel Felled Seams — Even Load Distribution, Large-Range Movement Seam Failure Resistance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCare Instructions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMachine wash cold (max 30°C) — inside out; cold inside-out washing protects the resin-paste print’s surface layer from mechanical abrasion against the drum and preserves the rainbow colors’ edge-bleed effects from further uncontrolled color migration\u003c\/li\u003e\n\u003cli\u003eHang dry — the high-GSM cotton’s dimensional stability is good at cold wash, but tumble-dry heat risks shrinkage at the double-layer ribbed collar’s rib structure\u003c\/li\u003e\n\u003cli\u003eDo not tumble dry at high heat — sustained heat may cause cotton shrinkage and resin-paste print layer thermal stress\u003c\/li\u003e\n\u003cli\u003eDo not bleach — the white ground’s purity is the rainbow print’s contrast base; bleaching will destroy the ground and unpredictably alter the resin-paste ink layers’ color balance\u003c\/li\u003e\n\u003cli\u003eDo not iron over the print zone — direct iron heat may soften and flatten the resin-paste’s surface relief, reducing the chalk-abrasion effect’s tactile presence; iron at low temperature on the back panel only\u003c\/li\u003e\n\u003cli\u003eSeparate light colors when washing — the white cotton ground should not share a wash bath with dark garments that may release dye onto the light surface\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eSKU: A009CTTVVK99000  |  Available in sizes XS–L  |  Unisex  |  Relaxed Fit  |  Balenciaga FW26\u003c\/em\u003e\u003c\/p\u003e","brand":"Balenciaga","offers":[{"title":"XS","offer_id":47644625272866,"sku":null,"price":119.0,"currency_code":"USD","in_stock":true},{"title":"S","offer_id":47644599025698,"sku":null,"price":119.0,"currency_code":"USD","in_stock":true},{"title":"M","offer_id":47644599058466,"sku":null,"price":119.0,"currency_code":"USD","in_stock":true},{"title":"L","offer_id":47644599091234,"sku":null,"price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/7923\/0242\/files\/55_432e383d-fa4e-4c29-989a-495aaf9b1d88.jpg?v=1789718054"},{"product_id":"balenciaga-fw26-rainbow-chalk-effect-logo-long-sleeve-t-shirt-whitea009cttvvk99000-副本","title":"Balenciaga FW26 Rainbow Chalk-Effect Logo Long-Sleeve T-Shirt – Blackhh3800917","description":"\u003ch2\u003eBalenciaga FW26 Rainbow Chalk-Effect Logo Long-Sleeve T-Shirt – Black\u003c\/h2\u003e\u003cp\u003eThe black colorway of the Balenciaga FW26 rainbow chalk-effect logo long-sleeve T-shirt — the same construction platform as the white version (SKU A009CTTVVK99000), with a print-physics argument that shifts fundamentally on a dark ground. The shell: the same \u003cstrong\u003ehigh-GSM combed double-yarn plain-weave 100% cotton\u003c\/strong\u003e — soft and yielding yet naturally structured, not soft-collapsed or body-clinging, the high-GSM weight providing both the self-supporting drape and the stable print substrate that the multi-pass chalk-abrasion process requires. The print: the same \u003cstrong\u003esix-color sequential rainbow chalk-abrasion resin-paste process\u003c\/strong\u003e — purple, blue, green, yellow, red, applied in independent passes with deliberate edge-bleeding, particulate mottling, and partial soft-focus edge effects. On black: each color layer’s opacity, the resin-paste ink’s surface presence, and the rainbow’s spectral progression operate against a light-absorbing ground rather than a reflective one — producing a print whose colors are self-luminous in appearance rather than ground-dependent. The same reinforced collar system and drop-shoulder double-channel felled seam shoulder construction. Unisex. XS–L.\u003c\/p\u003e\u003ch3\u003eBlack vs. White – The Same Six-Color Chalk-Abrasion System, Two Opposite Print-Physics Arguments\u003c\/h3\u003e\u003cp\u003eBoth Balenciaga FW26 rainbow chalk-effect long-sleeve T-shirts share an identical construction platform: high-GSM combed double-yarn plain-weave cotton, six-color sequential resin-paste chalk-abrasion print (purple→blue→green→yellow→red), double-layer reinforced ribbed crewneck with internal binding tape and back-neck bartack, drop-shoulder double-channel felled shoulder seams, XS–L unisex sizing at identical measurements. The single variable: the ground color, which changes the print’s visual physics entirely. White ground (SKU A009CTTVVK99000): the rainbow colors read against a reflective, neutral ground — each color’s hue is visible as a tonal variation against the white, the edge-bleed and mottling effects legible as chalk-on-white-surface texture, the print’s graffiti reference reading as chalk or marker on a light wall. Black ground (this version, SKU hh3800917): the rainbow colors’ resin-paste ink layers read against a light-absorbing dark ground — each color appears \u003cstrong\u003eself-luminous\u003c\/strong\u003e, as if emitting its own light against the black rather than reflecting borrowed ambient light, the purple-to-red spectral progression reading as a neon or UV-reactive surface. The chalk-abrasion effect’s edge-bleed and mottling on black: the deliberate under-coverage zones (the “missing” chalk sections, the mottled low-density areas) read as the black ground showing through the ink layer rather than as white paper showing through chalk — the abrasion effect’s visual language shifted from “chalk on a light surface” to “paint peeling from a dark surface,” the same process producing a different spontaneous-mark reference on a different ground.\u003c\/p\u003e\u003ch3\u003eWhy You’ll Love It\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRainbow Chalk-Abrasion Print on Black – Self-Luminous Color Against a Light-Absorbing Ground:\u003c\/strong\u003e The resin-paste ink system’s opacity on black: the rubber-compound binder’s opacity — its ability to sit on top of the fabric surface and fully cover the ground color beneath it — is the critical property that allows a rainbow print to read with full color saturation on a black cotton ground. On white, any ink with partial transparency would still read correctly because the white ground contributes to the perceived color; on black, any transparency in the ink layer allows the black ground to absorb the ink’s intended hue rather than reflect it, resulting in color loss. The resin-paste system’s full opacity: the property that ensures each color layer’s hue reads at full saturation against the black ground, the purple appearing as purple rather than as a dark gray, the yellow appearing as yellow rather than as a khaki. The self-luminous appearance: on the black ground, each resin-paste color layer’s surface presence (sitting above the fabric plane) creates a slight elevation that catches directional light independently of the surrounding black ground’s flat surface — the ink’s surface elevation producing a highlight that reads as the color emitting rather than reflecting, the visual effect that reads as neon or UV-reactive in certain lighting conditions. The rainbow’s spectral progression on black: the purple-to-red sequence from top to bottom of the stacked logotype reads as a complete visible spectrum segment against the black — the color range that maximizes spectral contrast against the dark ground, the purple and red at the progression’s extremes reading as the furthest-apart hues against the black’s neutral darkness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge-Bleed, Mottling, and Soft-Focus Edge on Black – The Chalk-Abrasion Aesthetic Recontextualized on a Dark Ground:\u003c\/strong\u003e The three chalk-abrasion techniques on black: (1) Edge bleeding on black — the controlled density reduction at each letterform’s outer boundary produces an edge where the color fades into the black ground rather than into a white surface, the transition reading as a color dissolving into darkness rather than chalk fading on paper; (2) Particulate mottling on black — the intentional within-zone ink density variation reads as the black ground visible through the ink layer at low-density zones, the effect reading as paint with varying coverage on a dark wall rather than chalk with varying density on white paper; (3) Partial soft-focus edge on black — the deliberately near-zero-ink interior zones read as the black showing through where the paint has not reached, producing a “paint on dark wall” or “spray paint over black” reference rather than the “chalk on white” reference that the white version produces. The combined effect: the same three production techniques produce a spontaneous-mark aesthetic on black that references street-art spray paint or neon signage rather than chalk, the graffiti spontaneity argument sustained across both colorways through the same process, the cultural reference shifted by the ground’s color.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-GSM Combed Double-Yarn Cotton on Black – The Fabric Specification’s Critical Role in Black-Ground Color Depth:\u003c\/strong\u003e The same high-GSM combed double-yarn plain-weave 100% cotton as the white version. On black: the high-GSM weight’s thread density and the combed yarn’s smooth, parallel-fiber surface are the fabric properties most critical to the black colorway’s ground-color depth. Thread density: the high stitch count per unit area minimizes the gaps between threads through which the garment’s interior (lighter in color) would show at the fabric’s surface, maintaining the black’s apparent depth as a continuous, uninterrupted dark ground. Combed yarn surface smoothness: the parallel-fiber alignment that combing produces creates a smoother fiber surface that absorbs and scatters less light than a carded-only yarn’s random-fiber surface, allowing the black dye’s darkness to read as a deeper, richer black rather than the gray-cast surface that lower-quality cotton’s fiber irregularity produces. The black ground’s color depth as the print’s contrast base: the depth and richness of the black ground is the variable that determines how luminous the rainbow colors appear against it — a grayed or faded black ground reduces the apparent contrast and the self-luminous effect; the high-GSM combed cotton’s black depth maximizes both.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-Layer Reinforced Collar + Drop-Shoulder Double-Channel Seams – Identical Construction Standard on Black:\u003c\/strong\u003e The same collar and shoulder construction as the white version: double-layer reinforced ribbed crewneck with internal hidden binding tape, dense even stitch lines, back-neck bartack reinforcement (preventing collar pull-out and roll-back), drop-shoulder cut with double-channel felled seams (even load distribution, large-range movement seam failure resistance). On black: the collar’s black rib and the body’s black cotton are color-matched at the attachment seam — the collar-to-body transition reading as a continuous black surface without a visible seam color contrast, the construction’s structural presence subordinated to the rainbow print’s visual dominance against the black ground.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSize Guide\u003c\/h3\u003e\u003cp\u003e\u003cem\u003eNote: All measurements are taken flat. A 1–3 cm variance is within normal range.\u003c\/em\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eShoulder (cm)\u003c\/th\u003e\n\u003cth\u003eChest (cm)\u003c\/th\u003e\n\u003cth\u003eLength (cm)\u003c\/th\u003e\n\u003cth\u003eHeight (cm)\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eXS\u003c\/td\u003e\n\u003ctd\u003e59\u003c\/td\u003e\n\u003ctd\u003e124\u003c\/td\u003e\n\u003ctd\u003e75\u003c\/td\u003e\n\u003ctd\u003e160–170\u003c\/td\u003e\n\u003ctd\u003e120–150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eS\u003c\/td\u003e\n\u003ctd\u003e61\u003c\/td\u003e\n\u003ctd\u003e128\u003c\/td\u003e\n\u003ctd\u003e77\u003c\/td\u003e\n\u003ctd\u003e165–175\u003c\/td\u003e\n\u003ctd\u003e150–170\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM\u003c\/td\u003e\n\u003ctd\u003e63\u003c\/td\u003e\n\u003ctd\u003e132\u003c\/td\u003e\n\u003ctd\u003e79\u003c\/td\u003e\n\u003ctd\u003e170–180\u003c\/td\u003e\n\u003ctd\u003e170–190\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL\u003c\/td\u003e\n\u003ctd\u003e65\u003c\/td\u003e\n\u003ctd\u003e136\u003c\/td\u003e\n\u003ctd\u003e81\u003c\/td\u003e\n\u003ctd\u003e175–185\u003c\/td\u003e\n\u003ctd\u003e190–220\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eMaterial \u0026amp; Construction Composition\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShell:\u003c\/strong\u003e 100% Cotton — High-GSM Combed Double-Yarn Plain-Weave, Black Depth Maximized by Thread Density and Combed Fiber Smoothness, Self-Supporting Drape\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint:\u003c\/strong\u003e Six-Color Sequential Rainbow — Chalk-Abrasion Resin-Paste Process, Purple→Blue→Green→Yellow→Red on Black Ground, Self-Luminous Color Appearance, Edge Bleed + Mottling + Soft-Focus Edge (Dark-Ground Paint\/Neon Reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCollar:\u003c\/strong\u003e Double-Layer Reinforced Ribbed Crewneck — Internal Hidden Binding Tape, Back-Neck Bartack, Black-Matched Collar-to-Body Transition\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShoulder:\u003c\/strong\u003e Drop-Shoulder Cut, Double-Channel Felled Seams — Even Load Distribution, Large-Range Movement Seam Failure Resistance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCare Instructions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMachine wash cold (max 30°C) — inside out; cold inside-out washing protects both the black ground’s color depth and the resin-paste print’s surface layer from drum abrasion\u003c\/li\u003e\n\u003cli\u003eHang dry — tumble-dry heat risks both cotton shrinkage and resin-paste ink thermal stress at the print zone\u003c\/li\u003e\n\u003cli\u003eDo not tumble dry at high heat — sustained heat risks shrinkage at the double-layer ribbed collar and dimensional loss at the drop-shoulder’s felled seam zones\u003c\/li\u003e\n\u003cli\u003eDo not bleach — the black ground’s depth is the rainbow print’s contrast base and the piece’s defining visual property; bleaching destroys both\u003c\/li\u003e\n\u003cli\u003eDo not iron over the print zone — direct heat may soften and flatten the resin-paste’s surface relief; iron at low temperature on the back panel only\u003c\/li\u003e\n\u003cli\u003eSeparate dark colors when washing — the black cotton may release residual dye in early wash cycles\u003c\/li\u003e\n\u003cli\u003eDry clean recommended for long-term preservation of black color depth, rainbow print surface integrity, and collar construction’s structural alignment\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eSKU: hh3800917  |  Available in sizes XS–L  |  Unisex  |  Relaxed Fit  |  Balenciaga FW26\u003c\/em\u003e\u003c\/p\u003e","brand":"Balenciaga","offers":[{"title":"XS","offer_id":47644627599394,"sku":null,"price":119.0,"currency_code":"USD","in_stock":true},{"title":"S","offer_id":47644627632162,"sku":null,"price":119.0,"currency_code":"USD","in_stock":true},{"title":"M","offer_id":47644627664930,"sku":null,"price":119.0,"currency_code":"USD","in_stock":true},{"title":"L","offer_id":47644627697698,"sku":null,"price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/7923\/0242\/files\/65_dd1ce017-aed0-462c-b2ef-26aac5e6cf02.jpg?v=1789718545"},{"product_id":"acne-studios-lambskin-double-breasted-short-leather-jacket-blacka70196-900-副本","title":"Balenciaga FW26 Brushed Plaid Long-Sleeve Shirt – Black\/White A001ZSTUM339040","description":"\u003ch2\u003eBalenciaga FW26 Brushed Plaid Long-Sleeve Shirt – Black\/White\u003c\/h2\u003e\u003cp\u003eThe Balenciaga FW26 shirt whose production complexity is entirely invisible in the finished garment — and entirely present in the cost and precision required to make it. The shell: a \u003cstrong\u003ebrushed and garment-washed cotton plaid\u003c\/strong\u003e — the fabric subjected to a surface-brushing process that raises the cotton’s surface fibers into a fine, dense nap, softening the black-and-white check’s color transitions from hard-edged to gradient, changing the fabric’s original surface sheen to a matte finish, and preserving the cotton’s natural drape so that the shirt hangs with relaxed structure rather than soft collapse. The construction: a \u003cstrong\u003efull pattern-matched cut\u003c\/strong\u003e across all seven independent pattern pieces — front body, back body, large sleeve, small sleeve, chest pocket, collar face, collar stand — each piece cut individually with the black-and-white plaid’s horizontal and vertical grid axes aligned at every seam junction. The collar: a \u003cstrong\u003edouble-layer combination structure\u003c\/strong\u003e — collar face and collar stand double-stitched as separate layers, even stitch spacing throughout, the construction that maintains the collar’s turned-down form under repeated folding without the collar tip lifting or the collar stand deforming. The placket: \u003cstrong\u003eregular topstitching with black matte buttons\u003c\/strong\u003e — button positions aligned to the plaid grid lines to preserve the check’s visual continuity across the closure zone. Garment-washed after assembly. Men’s. Sizes 1–4. The shirt that makes a precision-manufacturing argument through a deliberately vintage, relaxed finish.\u003c\/p\u003e\u003ch3\u003eWhy You’ll Love It\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrushed and Garment-Washed Cotton Plaid – The Two-Stage Treatment That Converts a Technical Fabric into a Vintage-Register Surface:\u003c\/strong\u003e The brushing process: a mechanical surface treatment applied to the cotton plaid fabric before cutting, in which a rotating drum or cylinder covered with fine wire teeth passes across the fabric’s surface, catching and raising the cotton’s surface fibers into a fine, dense nap layer above the weave’s base structure. The brushing’s three simultaneous effects on the black-and-white plaid: (1) \u003cstrong\u003eColor transition softening\u003c\/strong\u003e — the raised nap at the plaid’s warp-and-weft intersection zones mixes black and white surface fibers at the boundary where a black thread and a white thread are adjacent in the weave, producing a gradient transition between the two colors at their boundary rather than the hard-edged line that a smooth, un-brushed plaid surface produces — the soft color boundary that reads as the hallmark of a brushed flannel or aged cotton plaid rather than a crisp contemporary check; (2) \u003cstrong\u003eSurface sheen conversion\u003c\/strong\u003e — the original cotton plaid’s woven surface, whose smooth thread surfaces reflect ambient light at a consistent angle, is converted by the brushing process into a nap surface whose randomly oriented raised fibers scatter ambient light in multiple directions, eliminating the original surface sheen and producing the matte finish that reads as “vintage” or “worn-in” rather than “new”; (3) \u003cstrong\u003eDrape preservation\u003c\/strong\u003e — the brushing process is applied at an intensity calibrated to raise the surface nap without cutting or weakening the plaid’s woven base structure, preserving the cotton’s natural weight and thread-interlocking drape behavior so that the shirt hangs with the same structural relaxation as the un-brushed base fabric. The garment wash applied after assembly: the aqueous washing process applied to the fully constructed shirt — the wash that reinforces the vintage texture the brushing initiated (relaxing the fabric’s post-cut-and-sew tension, softening any remaining stiffness at the seam zones, and producing the “unified color-tone texture” that the production brief specifies), that reduces the industrial precision of the construction’s seams and edges to a more relaxed, worn-in appearance, and that ensures the shirt’s measurements and surface character at first wear are the fully settled, post-wash state rather than the pre-wash state that would subsequently shrink and change with the buyer’s first washing cycle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Pattern-Matched Cut Across Seven Independent Pattern Pieces – The Production Standard That the Black-and-White Plaid Demands and That Most Manufacturers Avoid:\u003c\/strong\u003e Pattern matching: the process of aligning a fabric’s repeat pattern (in this case, the black-and-white plaid’s horizontal and vertical grid) at every seam junction of the garment so that the pattern appears continuous across seam lines in the finished garment, as if the seams do not interrupt the fabric’s grid. The seven independent pattern pieces and their matching requirements: (1) Front body left panel — the reference piece against which all other pieces must align; (2) Front body right panel — must align horizontally with the left panel at the button placket, so the check’s horizontal lines continue without step across the closure; (3) Back body — must align with the front body at the shoulder seams (horizontal grid continuity) and at the side seams (both horizontal and vertical grid continuity at the shirt’s side junction); (4) Large sleeve — must align with the back and front body at the armhole seam, the plaid’s grid continuing from the body into the sleeve; (5) Small sleeve — must align with the large sleeve at the sleeve seam; (6) Chest pocket — must align with the front body left panel at both the horizontal and vertical grid axes, the pocket’s check pattern reading as an extension of the body panel rather than an appliqued piece of misaligned fabric; (7) Collar — cut separately with the plaid aligned to the collar’s grain line and the body’s grid orientation. The pattern matching’s production cost: each of the seven pieces must be individually positioned on the fabric before cutting, with the piece’s alignment verified against the plaid’s grid before the cut is made — the pattern-matching process that the production brief describes as requiring “high precision from the cutting table layout and the workers’ cutting accuracy,” and that generates additional fabric waste (‘extra loss’ from layout) because the individual pieces cannot be nested in the fabric-efficient random-orientation patterns that non-matched cutting allows. The result of full pattern-matching: a shirt whose plaid grid reads as continuous from front to back, from body to sleeve, and from body to pocket — the visual coherence that is the maximum standard achievable in plaid-garment construction and that the production brief identifies as “the greatest challenge in plaid garment production.”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-Layer Collar Construction – The Structural Standard That Prevents Collar Tip Lifting and Collar Stand Deformation Under Repeated Folding:\u003c\/strong\u003e The collar construction: a double-layer combination structure in which the collar face (the outer layer visible when the collar is worn turned down) and the collar stand (the inner layer that attaches the collar to the shirt’s neckband seam) are constructed as separate, independently structured layers, then double-stitched together at their joining seam with even stitch spacing throughout. The double-layer’s structural advantage: the collar face’s interfaced outer layer provides the collar tip’s shape retention (the tip’s ability to lie flat against the chest rather than curling upward), while the collar stand’s separate construction provides the stand’s dimensional stability (its ability to maintain its upright position at the neckline rather than collapsing and causing the collar face to bunch or fold unevenly). The double-stitching’s function: the two parallel rows of stitching at the collar face-to-stand junction distribute the mechanical stress of repeated collar folding (opening and closing the collar, turning the collar up in cold weather, pressing the collar flat) across twice the thread count of a single-row junction, reducing the per-stitch load at the highest-stress point in the collar’s construction. The even stitch spacing specification: the production brief’s explicit requirement that the double-stitching’s thread intervals are uniform throughout the collar’s perimeter — the stitch consistency that is the visible quality marker of precision collar construction, distinguishing a carefully made collar from one whose stitch spacing varies with the sewing operator’s speed variation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlacket Topstitching with Grid-Aligned Black Matte Buttons – The Detail That Preserves the Plaid’s Visual Continuity at Its Most Structurally Complex Zone:\u003c\/strong\u003e The placket: the reinforced front-opening band that carries the button and buttonhole system, the zone where the shirt’s two front body panels overlap and close. On a plaid shirt, the placket is the highest-risk zone for visual disruption: the button positions, if placed without reference to the plaid’s grid, will interrupt the check’s horizontal lines at the closure, creating a visual step or break in the plaid’s continuity that is visible at medium distance. The production brief’s specification: \u003cstrong\u003ebutton positions aligned to the plaid’s grid lines\u003c\/strong\u003e — each button positioned at a horizontal grid line in the plaid’s check pattern, so the button reads as placed at a natural grid intersection rather than at an arbitrary point that interrupts the pattern. The black matte buttons: the hardware whose color (black, matching the plaid’s dark grid lines) and finish (matte, matching the brushed fabric’s matte surface character) are calibrated to read as part of the plaid’s visual system rather than as contrasting hardware applied to the fabric surface — the button that recedes into the plaid’s grid rather than competing with it. The placket topstitching: the regular-interval machine stitch line running parallel to the placket’s edge — the topstitch that reinforces the placket’s structure (preventing the placket band from curling away from the shirt’s front panel) and that reads as the deliberate, even line of precision construction rather than the invisible stitch of a tailored placket finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSleeve Seam Pattern Continuity + Overlock-Reinforced Seams – The Construction Standard That Extends Pattern Matching’s Precision to the Garment’s Most Complex Curved Seam Zone:\u003c\/strong\u003e The sleeve seam pattern continuity: the production brief’s specification that the sleeve’s pattern-piece cutting accounts for the plaid’s directional orientation at the cuff junction — the sleeve seam’s plaid grid aligned so the check’s lines continue from the sleeve body to the cuff attachment without a visible grid interruption at the cuff seam. The overlock-reinforced seams: an overlock (serger) stitch applied to all seam allowances after the main seam stitching, enclosing the raw fabric edges within a looped thread structure that prevents the seam allowance’s edges from fraying inward under repeated washing and wearing. The overlock’s practical implication for the brushed cotton plaid: the brushing process that raises the cotton’s surface fibers also makes the fabric’s cut edges more prone to fraying than an un-brushed plain weave, as the raised surface fibers at the cut edge are more loosely attached to the base weave than unraised fibers. The overlock reinforcement addresses this directly: by enclosing the cut edge’s raised fiber zone within the looped thread structure, the overlock prevents the fraying that the brushing process would otherwise accelerate at the seam allowance edges through repeated flexing in wear.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSize Guide\u003c\/h3\u003e\u003cp\u003e\u003cem\u003eNote: All measurements are taken flat. A 1–3 cm variance is within normal range.\u003c\/em\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eShoulder (cm)\u003c\/th\u003e\n\u003cth\u003eChest (cm)\u003c\/th\u003e\n\u003cth\u003eLength (cm)\u003c\/th\u003e\n\u003cth\u003eHeight (cm)\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e49\u003c\/td\u003e\n\u003ctd\u003e116\u003c\/td\u003e\n\u003ctd\u003e81\u003c\/td\u003e\n\u003ctd\u003e160–170\u003c\/td\u003e\n\u003ctd\u003e100–140\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e51\u003c\/td\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003ctd\u003e83\u003c\/td\u003e\n\u003ctd\u003e165–175\u003c\/td\u003e\n\u003ctd\u003e140–160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e53\u003c\/td\u003e\n\u003ctd\u003e124\u003c\/td\u003e\n\u003ctd\u003e85\u003c\/td\u003e\n\u003ctd\u003e170–180\u003c\/td\u003e\n\u003ctd\u003e160–180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e55\u003c\/td\u003e\n\u003ctd\u003e128\u003c\/td\u003e\n\u003ctd\u003e87\u003c\/td\u003e\n\u003ctd\u003e175–185\u003c\/td\u003e\n\u003ctd\u003e180–200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eMaterial \u0026amp; Construction Composition\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShell:\u003c\/strong\u003e Cotton — Brushed Surface (Fine Dense Nap, Matte Finish, Soft Color Transitions), Garment-Washed After Assembly (Vintage Texture, Unified Tone, Industrial Edge Reduction)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePattern Matching:\u003c\/strong\u003e Full 7-Piece Independent-Panel Pattern Match — Front Body, Back Body, Large Sleeve, Small Sleeve, Chest Pocket, Collar Face, Collar Stand; Grid-Aligned at Every Seam Junction; Additional Fabric Layout Waste\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCollar:\u003c\/strong\u003e Double-Layer Combination Structure — Collar Face + Collar Stand Double-Stitched Separately, Even Stitch Spacing, Repeated-Folding Deformation Resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlacket:\u003c\/strong\u003e Regular Topstitching, Grid-Aligned Black Matte Buttons — Button Positions at Plaid Horizontal Grid Lines, Visual Continuity Preservation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeams:\u003c\/strong\u003e Overlock-Reinforced — Fraying Prevention at Brushed-Cotton Cut Edges, Extended Wear Durability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCare Instructions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMachine wash cold (max 30°C) — inside out; cold washing preserves the brushed surface nap’s raised fiber structure and the garment wash’s settled vintage texture\u003c\/li\u003e\n\u003cli\u003eHang dry — the cotton shirt’s pattern-matched panels require flat hanging to dry without bias pulling that could shift the plaid’s grid alignment at the seam junctions\u003c\/li\u003e\n\u003cli\u003eDo not tumble dry at high heat — sustained heat risks cotton shrinkage that may differentially affect the seven pattern-matched panels and shift the plaid’s grid alignment at seam junctions\u003c\/li\u003e\n\u003cli\u003eDo not bleach — the black-and-white plaid’s two-color system is destroyed by oxidizing agents; the brushed nap’s soft color transitions are irreversible once the black fibers are bleached\u003c\/li\u003e\n\u003cli\u003eIron at medium temperature — do not iron the brushed surface directly at high heat; use a pressing cloth or iron from the reverse side to preserve the nap’s surface texture and avoid flattening the raised fiber structure\u003c\/li\u003e\n\u003cli\u003eSeparate dark colors when washing — the black-ground plaid threads may release residual dye in early wash cycles\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eSKU: A001ZSTUM339040  |  Available in sizes 1–4  |  Men’s  |  Regular Fit  |  Balenciaga FW26\u003c\/em\u003e\u003c\/p\u003e","brand":"Balenciaga","offers":[{"title":"1","offer_id":47644843868194,"sku":null,"price":145.0,"currency_code":"USD","in_stock":true},{"title":"2","offer_id":47644843900962,"sku":null,"price":145.0,"currency_code":"USD","in_stock":true},{"title":"3","offer_id":47644843933730,"sku":null,"price":145.0,"currency_code":"USD","in_stock":true},{"title":"4","offer_id":47644843966498,"sku":null,"price":145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/7923\/0242\/files\/86_6deca698-7d1a-4c9c-9ebe-1f62ce943e0b.jpg?v=1789720368"}],"url":"https:\/\/vintagethrea.com\/collections\/balenciaga.oembed","provider":"Vintage Thread","version":"1.0","type":"link"}